Valid

GB/T 26449-2010Radiation hydraulic cyclone sizing units (English PDF)

辐射式水力旋流分级机组

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26449-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 14, 2011

Implementation date

October 1, 2011

Scope

GB/T 26449-2010 is the English-translated version of 辐射式水力旋流分级机组.

GB/T 26449-2010 is the Chinese standard "Radiation hydraulic cyclone sizing units". Its scope clause reads: This standard specifies the types and basic parameters of radiation hydrocyclone units, technical requirements, test methods, inspection rules and signs, including Loading, transport and storage.

This standard applies to radiation hydrocyclone unit (hereinafter referred to as "units"). The unit is mainly used for pulp grading, removal of mud and concentrated. Its clauses include types and basic parameters.

Found what you need?

Document preview — GB/T 26449-2010

National Standard of the People's Republic of China

ICS
73.120
Classification
D 96

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions

1 Scope

This standard specifies the types and basic parameters of radiation hydrocyclone units, technical requirements, test methods, inspection rules and signs, including

Loading, transport and storage.

This standard applies to radiation hydrocyclone unit (hereinafter referred to as "units"). The unit is mainly used for pulp grading, removal of mud and concentrated.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 528 vulcanized rubber or thermoplastic rubber tensile stress strain properties (GB/T 528-2009, ISO 37.2005,

IDT)

GB/T 531.1 vulcanized rubber or thermoplastic rubber hardness test pushed Part 1. Shore hardness method (Shore hardness) (GB/T 531.1-2008, ISO 7619-1.2004, IDT)

GB/T 1689 Determination of abrasion resistance of vulcanized rubber (in Akron machine) (GB/T 1689-1998, neqBS903.

PartA9. 1988)

GB/T 3452.1 hydraulic and pneumatic rubber O-ring Part 1. Dimensions, tolerances (GB/T 3452.1-2005,

ISO 3601-1.2002, MOD)

GB/T 7284 wooden frame

GB/T 9969 General Instructions industrial products

GB/T 10819 wooden chassis (GB/T 10819-2005, JISZ1405. 1984)

GB/T 13306 signs

JB/T 5000.12 Heavy Machinery General technical requirements - Part 12. Painting

Inspection and testing JB/T 9092 valve

3 Types and basic parameters

Type 3.1

3.1.1

The unit comprises. a cyclone, a gate valve, slurry is divided into slurry pipe rack, platform, overflow tank, grit tank and valve control system, shown in Figure 1.

3.1.2

The unit uses feed, pulp discharged from the bottom center of the overflow from the side of overflow, underflow slurry from the bottom of the groove grit discharged knot

Structure type.

3.1.3

cyclone left the general feed of the feeding, usually by the body straight, cone, swirl chamber, grit mouth Importers and fittings, overflow pipe section

Pieces of composition, shown in Figure 2.

3.1.4

Valve Closure function by inserting a stainless steel or lift gate to achieve, by valve operation can be divided into. manual, manual plus

Force, pneumatic, hydraulic, electric. With the unit supporting the use of pneumatic valve usually can be equipped as required in situ and remote control of the main control room system.

GB/T 29723.5-2019 | GB/T 10605-2015 | MT 76-2011 | GB/T 38947-2020 | GB/T 35055-2018 | GB/T 35054-2018 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 26449-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26449-2010

$165.00