GB/T 26260-2010Synthetic reuse of power supply system for access network equipment and remote module (English PDF)

1 Scope

This standard specifies the access network equipment and power system remote module integrated recycling technology requirements, test methods and judgment and in principle.

This standard applies to comprehensive recycling network access device and a remote power supply module and other supporting systems.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

YD/T 731-2008 communication with high-frequency switching rectifier

YD/T 1058-2007 communication frequency switching power supply system

YD/T 1436-2006 Outdoor Communication Power Supply System

3 Terms and Definitions

The following terms and definitions apply to this standard.

4 power supply system and external interface

FIG access network equipment and power system remote module position at the distal end communications room or outdoor cabinet with external interface shown in Figure 1.

The power supply system includes an AC input port external interface, monitoring communication interface, DC load interface.

YD/T 1092-2023 | YD/T 2165-2010 | YD/T 777-2006 | GB/T 38833-2020 | GB/T 26264-2010 | GB/T 26263-2010 | […]