Valid

GB/T 26065-2010Specification for polished test silicon wafers (English PDF)

硅单晶抛光试验片规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26065-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 10, 2011

Implementation date

October 1, 2011

Scope

GB/T 26065-2010 is the English-translated version of 硅单晶抛光试验片规范.

GB/T 26065-2010 is the Chinese standard "Specification for polished test silicon wafers". Its scope clause reads: standard specifies the technical requirements for preparing a semiconductor device used for inspection and process control in the silicon single crystal of the test piece.

This standard covers the sizes of crystal orientation and surface defects characteristic requirements. This standard covers all 50.8mm ~ 300mm Nominal diameter silicon test piece was polished technical requirements.

For more demanding specifications polished silicon single crystal, such as. particle testing wafers, test wafers resolution lithography and metal ions most Tablets, see SEMI24 "monocrystalline silicon polished wafer quality specifications.". Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 26065-2010

National Standard of the People's Republic of China

ICS
29.045
Classification
H 80

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions

1 Scope

1.1

standard specifies the technical requirements for preparing a semiconductor device used for inspection and process control in the silicon single crystal of the test piece.

1.2

This standard covers the sizes of crystal orientation and surface defects characteristic requirements. This standard covers all 50.8mm ~ 300mm

Nominal diameter silicon test piece was polished technical requirements.

1.3

For more demanding specifications polished silicon single crystal, such as. particle testing wafers, test wafers resolution lithography and metal ions most

Tablets, see SEMI24 "monocrystalline silicon polished wafer quality specifications."

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 1550 extrinsic conductivity type semiconductor material testing methods

GB/T 1554 crystallographic perfection of silicon by preferential etch test methods

GB/T 1555 to the measurement method of a semiconductor single crystal

GB/T 1557 interstitial oxygen content in the silicon crystal infrared absorption measurement method

GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan

GB/T 4058 Test Method polished silicon oxide induced defects

GB/T 6616 resistivity of semiconductor silicon and silicon thin film sheet resistance test method of non-contact eddy current method

GB/T 6618 wafer thickness and total thickness variation of test methods

GB/T 6619 wafer curvature testing methods

GB/T 6620 wafer warpage non-contact test method

GB/T 6621 Test Method for wafer surface flatness

GB/T 6624 polished silicon surface quality by visual inspection

Methods of measurement GB/T 11073 radial resistivity variation on silicon

GB/T 12964 monocrystalline silicon polished wafer

GB/T 13387 and other electronic materials silicon wafer reference surface length measurement method

GB/T 13388 wafer reference surface crystallographic orientation of the X-ray test method

GB/T 14140 wafer diameter measuring method

GB/T 14264 semiconductor material terms

YS/T 26 wafer edge profile test methods

SEMI24 quality monocrystalline silicon polished wafer specification

ASTMF1526 surface of the metal content measurement

3 Terms and Definitions

Terms and definitions GB/T 14264 apply as defined in this document.

GB/T 29055-2019 | GB/T 16595-2019 | GB/T 16596-2019 | GB/T 14264-2024 | GB/T 29057-2023 | GB/T 26066-2010 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

Similar standards

How to Download GB/T 26065-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
16 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 26065-2010

$285.00