Valid

GB/T 25719-2010Electro hydraulic forging hammer - Technical requirements (English PDF)

电液锤 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 25719-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 23, 2010

Implementation date

July 1, 2011

Scope

GB/T 25719-2010 is the English-translated version of 电液锤 技术条件.

GB/T 25719-2010 is the Chinese standard "Electro hydraulic forging hammer - Technical requirements". Its scope clause reads: This standard specifies the technical requirements for electric-hydraulic hammer, test methods, inspection rules and signs, packaging, transportation and storage.

This standard applies to electro-hydraulic hammer (including an anvil-type electro-hydraulic free forging hammer, forging electro-hydraulic hammer, NC forging electro-hydraulic hammer), also applies to the transformation Steam - air hammer electro-hydraulic power head. Its clauses include technical requirements.

Found what you need?

Document preview — GB/T 25719-2010

National Standard of the People's Republic of China

ICS
25.120.10
Classification
J 62

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Technical requirements
  • 3.1 Basic requirements

1 Scope

This standard specifies the technical requirements for electric-hydraulic hammer, test methods, inspection rules and signs, packaging, transportation and storage.

This standard applies to electro-hydraulic hammer (including an anvil-type electro-hydraulic free forging hammer, forging electro-hydraulic hammer, NC forging electro-hydraulic hammer), also applies to the transformation

Steam - air hammer electro-hydraulic power head.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)

GB/T 3766 Hydraulic System General technical conditions (GB/T 3766-2001, eqv ISO 4413.1998)

GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements (GB 5226.1-2008,

IEC 60204-1.2005, IDT)

GB/T 6576 machine lubrication system (GB/T 6576-2002, eqv ISO 5170. 1977)

GB/T 7932 pneumatic systems General technical conditions (GB/T 7932-2003, ISO 4414.1998, IDT)

GB/T 9969 General Instructions industrial products

GB/T 10923 Forging Machinery General accuracy test

GB/T 13306 signs

GB 17120 Metalforming machinery - Safety requirements

GB/T 23281 Forging Machinery noise level measurement method (GB/T 23281-2009, ISO 11202.1995, NEQ)

GB/T 25718 electro-hydraulic hammer types and basic parameters

JB/T 1829 Forging Machinery General technical conditions

JB/T 5775 Forging Machinery gray iron castings

JB/T 8356.1 Technical Conditions Packaging Machine

JB/T 8467 forgings ultrasonic flaw detection method

JB/T 8609 forging machinery welding parts and technical conditions

JB/T 9954 Metalforming Machinery Hydraulic System Cleanliness

3 Technical requirements

3.1 Basic requirements

3.1.1

Electro-hydraulic hammer shall comply with JB/T 1829 and the provisions of this standard, in accordance with prescribed procedures approved manufacturing drawings and technical documents.

3.1.2

iron castings shall comply with JB/T 5775, the welding shall comply with the provisions of JB/T 8609's.

3.1.3

Instructions shall comply with GB/T 9969's.

3.1.4

Important forgings should ultrasonic testing (such as the hammer, hammer, anvil, etc.), ultrasonic testing shall comply with JB/T 8467, and the

Do a good record.

3.1.5

electro-hydraulic hammer random spare parts, accessories should be interchangeable, and comply with the relevant technical documents.

3.1.6

All fasteners electro-hydraulic power head and body used to be taken against rotation, power head and body should cushion.

JB/T 13910.2-2020 | JB/T 13910.3-2020 | GB/T 36229-2018 | GB/T 25721-2010 | GB/T 25720-2010 | GB/T 25718-2010 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 25719-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 25719-2010

$195.00