Valid

GB/T 25634.2-2010Tire mould electro-discharge machines - Part 2: Parameters (English PDF)

电火花轮胎模加工机床第2部分：参数

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 25634.2-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 1, 2010

Implementation date

March 1, 2011

Scope

GB/T 25634.2-2010 is the English-translated version of 电火花轮胎模加工机床第2部分：参数.

GB/T 25634.2-2010 is Part 2 of GB/T 25634 and fixes the main parameters of tire mould electro-discharge machines. Clause 1 states that this part applies to newly designed tire mold EDM machine tools, which it shortens to the "Machine"; no exclusion is stated.

The foreword records that GB/T 25634 is divided into two parts, Part 1 on testing of the accuracy and Part 2 on parameters, and warns that some of the content may involve patents, for which the issuing body does not take responsibility for identification.

The part is short: Scope, Normative references and a clause headed parameters. That clause refers the machine type to Figure 1 and Figure 2 and requires the machine to conform to the parameters specified in Table 1, whose values the draft does not print.

Clause 2 cites GB/T 19764-2005. It was proposed by China Machinery Industry Federation, administered by the National Standardization Technical Committee special machine tools (SAC/TC161) and drafted by the Suzhou EDM Machine Tool Institute. It was issued on 2010-12-01 and has applied since 2011-03-01.

Found what you need?

Document preview — GB/T 25634.2-2010

National Standard of the People's Republic of China

ICS: 25.080.99
Classification: J 59

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Parameters

Foreword

GB/T 25634 "EDM tire mold processing machine" is divided into two parts.

--- Part 1. Testing of the accuracy;

--- Part 2. parameter.

This section GB/T 25634 Part 2. […]

1 Scope

This section GB/T 25634 specifies the main parameters of the tire mold EDM machine tools.

This section applies to the newly designed tire mold EDM machine tools (hereinafter. the "Machine").

2 Normative references

The following documents contain provisions which, through reference GB/T 25634 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 19764-2005 priority number and priority number of the entire value range of Selection Guide (ISO 497. 1973, IDT)

3 Parameters

Machine type shown in Figure 1, Figure 2, the machine should be consistent with the parameters specified in Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 19764-2005Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers

Similar standards

GB 46037-2025|GB/T 14896.1-2025|GB/T 14896.10-2025|GB/T 14896.2-2025|GB/T 14896.3-2025|GB/T 14896.4-2025

How to Download GB/T 25634.2-2010

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.