GB/T 25479-2010Paperless recorder for use in industrial-process measurement and control systems (English PDF)

1 Scope

This standard specifies the paperless recorder (hereinafter referred to as recorders) product classification and basic parameters, technical requirements, test methods, inspection regulations

And the signs, packaging, transportation and storage requirements.

This standard applies to industrial process measurement and control systems of the paperless recorder.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements (IEC 61010.2001, IDT)

GB/T 13384 mechanical and electrical products packaging General technical conditions

GB/T 17626.2 Electromagnetic compatibility Testing and measurement techniques - Electrostatic discharge immunity test (GB/T 17626.2-2006,

IEC 61000-4-2.2001, IDT)

GB/T 17626.3 electromagnetic compatibility test and measurement technology RFEMS test (GB/T 17626.3-

2006, IEC 61000-4-3.2002, IDT)

GB/T 17626.4 Electromagnetic compatibility Testing and measurement techniques - Electrical fast transient burst immunity test (GB/T 17626.4-

2008, IEC 61000-4-4.2004, IDT)

GB/T 17626.5 electromagnetic compatibility test and measurement technology surge (impact) immunity test (GB/T 17626.5-2008,

IEC 61000-4-5.2005, IDT)

GB/T 17626.6 electromagnetic compatibility test and measurement technology RF field induced immunity to conducted disturbances (GB/T 17626.6-

2008, IEC 61000-4-6.2006, IDT)

GB/T 17626.11 Electromagnetic compatibility Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (GB/T 17626.11-2008, IEC 61000-4-11.2004, IDT)

GB/T 18268.1 measurement, control and laboratory use EMC requirements for electrical equipment Part 1. General requirements (GB/T 18268.1-2000, IEC 61326-1.2005, IDT)

GB/T 18271.1-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 1. General (IEC 61298-1.1995, IDT)

GB/T 18271.2-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 2. under reference conditions

Test (IEC 61298-2.1995, IDT)

GB/T 18271.3-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3. effects of influence quantities

Test (IEC 61298-3.1998, IDT)

GB/T 22162 panel and rack - mounted industrial process measurement and control instrumentation disk and opening size (GB/T 22162-2008,

IEC 60668. 1980, IDT)

GB/T 25480 Instrumentation transportation, storage and basic environmental conditions and test methods

3 Terms and Definitions

GB/T 18271.1-2000, GB/T 18271.2-2000 and GB/T 18271.3-2000 established and the following terms and definitions

Justice apply to this standard.