GB/T 25391-2010Technical specification of water-pumping wind-mill (English PDF)

Foreword

Appendix A of this standard is an informative annex. The standard proposed by China Machinery Industry Federation.

1 Scope

This standard specifies the content of wind power for the unit model, technical requirements, test methods, packaging, transport and so on.

This standard applies to 20kW or less, and the horizontal axis, or mechanical transmission of wind power for electric drive unit.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 197 common thread tolerance (GB/T 197-2003, ISO 965-1:1998, MOD)

GB/T 985.1 gas welding, arc welding, gas welding and beam welding Recommended groove (GB/T 985.1-2008, ISO 9692-1:2003, MOD)

GB/T 1032 Test Methods for Three-phase asynchronous motor

GB/T 1095 flat key keyway cross-sectional dimensions (GB/T 1095-2003, ASMEB18.25.1M.1996, neq)

GB/T 1096 Ordinary flat key (GB/T 1096-2003, ASMEB18.25.1M.1996, neq)

GB/T 1184-1996 shape and position tolerances without individual tolerance value (ISO 2768-2. 1989, eqv)

GB/T 1220 stainless steel rods

GB/T 1527 copper and copper alloy tube drawing

GB/T 1804 General tolerances Tolerances for linear and angular dimensions without individual tolerance (GB/T 1804-2000, ISO 2768-1. 1989, eqv)

GB/T 2816 wells with submersible pumps

GB/T 2818 submersible induction motor

GB/T 2900.53 Electrotechnical terminology Wind turbine generator (GB/T 2900.53-2001, IEC 60050-415:1999, IDT)

GB/T 3091 low pressure liquid delivery welded steel pipe (GB/T 3091-2008, ISO 559:1991, neq)

GB/T 3214 Determination of water pump flow

GB/T 3216-2005 rotary power pump hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906:1999, MOD)

GB 4208-2008 housing protection (IP Code) (IEC 60529:2001, IDT)

GB/T 4662 Rolling static load rating (GB/T 4662-2003, ISO 76. 1987, ISO 76/AMD.1.1999, IDT)

GB 4824 industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement (GB 4824-2004, CISPR11.2003, IDT)

GB/T 4942.1 overall structure of the rotary motor protection (IP code) - Classification (GB/T 4942.1-2006, IEC 60034-5:2000, IDT)

GB/T 5661 suction centrifugal pumps mechanical seals and for soft packing cavity size (GB/T 5661-2004, ISO 3069:2000, IDT)

GB/T 6391 Rolling bearings - Dynamic load ratings and rating life (GB/T 6391-2003, ISO 281:1990, ISO 281. 1990/AMD.1.2000, ISO 281:1990/AMD.2.2000, IDT)

GB/T 7784 Test Method for reciprocating pump motor

GB/T 10760.2-2003 off-grid wind turbine generator systems - Part 2: Test methods