GB/T 24912-2015Additive pipe pressure water supply devices for columned tank (English PDF)
罐式叠压给水设备
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24912-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 3, 2015
Implementation date
June 1, 2016
Scope
GB/T 24912-2015 is the English-translated version of 罐式叠压给水设备.
GB/T 24912-2015 is the Chinese standard "Additive pipe pressure water supply devices for columned tank".
Its scope clause reads: This standard specifies the tank overlying water supply equipment (hereinafter referred to as the device) terms and definitions, classification and type, conditions of use and device groups Cheng, requirements, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to tank overlying water supply equipment design, production and testing. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 24912-2015
National Standard of the People's Republic of China
- ICS
- 91.140.01
- Classification
- P 42
- Replacing
- GB/T 24912-2010
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification and type
- 5 conditions and equipment consisting of
- 6 Requirement
- 7 Test methods
- 8 Inspection Rules
- 9 signs, packaging, transportation and storage
- Appendix A (informative) equipment components
- Annex B (informative) test instrumentation and equipment
1 Scope
This standard specifies the tank overlying water supply equipment (hereinafter referred to as the device) terms and definitions, classification and type, conditions of use and device groups
Cheng, requirements, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to tank overlying water supply equipment design, production and testing.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 150.1 pressure vessels - Part 1. General requirements
GB 150.2 pressure vessels - Part 2. Materials
GB/T 191 Packaging - Pictorial signs
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat
GB/T 2423.3 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test
GB/T 3047.1 height of 20mm hex panels, rack and cabinets Series of basic dimensions
Determination of GB/T 3214 water pump flow
GB/T 3216 rotary power pump hydraulic performance acceptance tests - Grades 1 and 2
GB/T 3797-2005 Electric Control Equipment
GB 4208 housing protection (IP Code)
GB/T 5656 centrifugal technical conditions (II type)
GB/T 13306 signs
GB/T 17219 in drinking water safety equipment and protective materials evaluation criteria
GB 19762 water pump energy efficiency of limited value and energy conservation evaluation values
CJ/T 254 pipe network overlying water supply equipment
CJ/T 352 computer control frequency control water supply equipment
Noise measurement JB/T 8098 pump and Evaluation Method
JJG49 elastic element precision pressure gauge and vacuum meter testing procedures
JJG795 withstand voltage tester test procedures
JJG984 Ground Testers test procedures
JJG1005 electronic insulation resistance meter
JJG1033 electromagnetic flowmeter test procedures
3 Terms and Definitions
The following terms and definitions apply to this document.
GB/T 41494-2022 | GB/T 18916.41-2019 | GB/T 19249-2017 | GB/T 43298-2023 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
Editions of GB/T 24912
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 24912-2015 | Additive pipe pressure water supply devices for columned tank | current edition | Current |
| GB/T 24912-2010 | Additive pipe pressure water supply devices for columned tank | previous edition | Superseded |
This page sells the current edition, GB/T 24912-2015. Earlier editions are listed for reference only.
How to Download GB/T 24912-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 24912-2015
$295.00