Valid

GB/T 24800.8-2009Determination of methotrexate in cosmetics by high performance liquid chromatography method (English PDF)

化妆品中甲氨嘌呤的测定 高效液相色谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 24800.8-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 30, 2009

Implementation date

May 1, 2010

Scope

GB/T 24800.8-2009 is the English-translated version of 化妆品中甲氨嘌呤的测定 高效液相色谱法.

GB/T 24800.8-2009 sets out a high performance liquid chromatography method for determining methotrexate in cosmetics. Clause 1 states that the method applies to that determination and gives a detection limit of 1 mg/kg and a quantification limit of 2.5 mg/kg, without naming any exclusion.

The principle in clause 2 is ultrasonic extraction into a mobile phase of methanol and 0.025 mol/L sodium dihydrogen phosphate (pH 5.0) at 30 + 70 (v/v), centrifugation, filtration through a 0.45 µm organic membrane and injection into a liquid chromatograph fitted with a diode array detector (DAD), quantified against an external standard.

The clauses are Scope, Principle, Reagents and materials, Instrument and measuring step, with an informative Appendix A. Clause 3 lists chromatographically pure methanol, tetrahydrofuran and methotrexate of purity not less than 97% (CAS number 59-05-2), a 500 mg/L standard stock solution and working solutions from 0.05 mg/L to 20 mg/L, while clause 4 lists the apparatus, including a 10 µL micro-injector, an ultrasonic cleaner, a centrifuge above 5000 r/min and 10 mL plug colorimetric tubes.

The Introduction explains that the substance measured is a banned substance under the "Hygienic Standard for Cosmetics" and that, since China has not yet specified a limit value for it, this standard provides only a method for detecting it in cosmetics.

It was proposed by China National Light Industry Council and handled by the National Standardization Technical Committee of Fragrance Flavor and Cosmetic (SAC/TC257).

The available draft breaks off inside 5.1 Sample Preparation, after about 0.2 g of sample is weighed into a 10 mL plug colorimetric tube and 8 mL of mobile phase is added. It was issued on 2009-11-30 and has applied since 2010-05-01.

Found what you need?

Document preview — GB/T 24800.8-2009

National Standard of the People's Republic of China

ICS
71.100.70
Classification
Y 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Principle
  • 3 Reagents and materials
  • 4 Instrument
  • 5 Measuring step

Foreword

Appendix A of this standard is an informative annex. The standard proposed by China National Light Industry Council.

Introduction

The standard test substance is banned substances of "Hygienic Standard for Cosmetics" shall consist of not as a cosmetic raw material, component Added to cosmetics. If technically unavoidable banned substances as impurities into cosmetics, the finished cosmetic products should follow the "Cosmetics Health standards "General requirements for cosmetics, that is, under normal and reasonably foreseeable conditions of use, should not cause harm to human health.

At present, China has not yet specified the limit value of the substance, of the standards, only cosmetics assay provides a method to detect the substance. Determination of methotrexate in cosmetics High Performance Liquid Chromatography

1 Scope

This standard specifies the method for determination of methotrexate in cosmetics.

This standard applies to the determination of methotrexate in cosmetics.

The standard for methotrexate detection limit of 1mg/kg, the limit of quantification of 2.5mg/kg.

2 Principle

Mobile phase - methanol 0.025mol/L sodium dihydrogen phosphate (pH5.0) (30 + 70, v/v) as solvent, ultrasonic extraction, centrifugation, 0.45µm organic membrane filter, the solution was injected with a diode array detector (DAD) liquid chromatography detection, external standard.

3 Reagents and materials

Unless otherwise specified, reagents were of analytical grade. Water for ultra-pure water.

3.1 Methanol. chromatographically pure.

3.2 Tetrahydrofuran. chromatography.

3.3 Methotrexate, purity of not less than 97%, CAS number. 59-05-2.

3.4 methotrexate standard stock solution. Weigh accurately methotrexate 0.05g, accurate to 0.0001g, in 50mL beaker, add 1mL 0.1mol/L sodium hydroxide solution and dissolved transferred 100mL flask with ultrapure water to volume, that was the concentration of methyl purine ammonia solution As the standard stock solution 500mg/L of. Stock solution chilled in the refrigerator, you can use two months.

3.5 Standard working solution. water above standard stock solution (3.4) respectively dubbed a series of concentration 0.05mg/L, 0.1mg/L, 1mg/L, 2mg/L, 5mg/L, 10mg/L, 20mg/L of standard working solution, stored in the refrigerator can be used for one week.

3.6 0.1mol/L sodium hydroxide solution. Weigh sodium hydroxide 0.4g, accurate to 0.001g, in 50mL beaker, dissolved in water Transferred to a 100mL volumetric flask, add water to volume, that was 0.1mol/L sodium hydroxide solution.

3.7 0.025mol/L of sodium dihydrogen phosphate (pH5.0). Weigh sodium dihydrogen phosphate (NaH2PO4 . 2H2O) 3.9g, accurate to 0.001g, in 100mL beaker, dissolved in water is transferred to 1000mL volumetric flask, add water to volume, that was 0.025mol/L Solution of sodium dihydrogen phosphate, with 0.1mol/L sodium hydroxide solution (3.6) adjusted to pH 5.0.

4 Instrument

4.1 liquid chromatograph equipped with a diode array detector.

4.2 Micro-injector, 10µL.

4.3 Ultrasonic cleaner.

4.4 Centrifuge, greater than 5000r/min.

4.5 and 0.45µm organic solvent filter filtration membranes.

4.6 Plug colorimetric tube, 10mL.

5 Measuring step

5.1 Sample Preparation

Weigh cosmetic samples about 0.2g, accurate to 0.001g, with plug in 10mL colorimetric tube, add 8mL mobile phase (methanol.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 24800.8-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 24800.8-2009

$105.00