GB/T 24737.6-2012Guide for technological management - Part 6: Process optimization and review (English PDF)
工艺管理导则 第6部分：工艺优化与工艺评审
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24737.6-2012 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 11, 2012
Implementation date
December 1, 2012
Scope
GB/T 24737.6-2012 is the English-translated version of 工艺管理导则 第6部分：工艺优化与工艺评审.
GB/T 24737.6-2012 is the Chinese standard "Guide for technological management - Part 6: Process optimization and review". Its scope clause reads: This section GB/T 24737 specifies the basic tasks of product and process optimization review, basic principles, framework and main content.
This section applies to a mechanical product development, process optimization and production process of assessment. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 24737.6-2012
National Standard of the People's Republic of China
- ICS
- 25.020
- Classification
- J 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General
- 5 Process optimization and assessment framework
- 8 review procedures and requirements
- Appendix A (informative) Process optimization and assessment framework
- Annex D (informative) new processes, technology evaluation and application of new technology content requirements
- Annex E (informative) Process Review Report Format
1 Scope
This section GB/T 24737 specifies the basic tasks of product and process optimization review, basic principles, framework and main content.
This section applies to a mechanical product development, process optimization and production process of assessment.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 4863-2008 Machinery Manufacturing Technology Basic Terminology
GB/T 19000-2008 Quality Management System Fundamentals and vocabulary
3 Terms and Definitions
GB/T 4863-2008 and defined the following terms and definitions apply to this document.
3.1 Process optimization (process optimization)
According to one (or several) criterion, and relevant parameters of the process to select the best solution.
[GB/T 4863-2008, the definition 3.1.31]
3.2 Technology Review
To determine the process design activities to achieve suitability, adequacy and effectiveness of the stated objectives carried out.
NOTE. rewrite GB/T 19000-2008, the definition of 3.8.7.
3.3 Key pieces keycomponents
It has key features parts or products.
Note. The key feature means that if a fault occurs, the possibility of personal accidents, loss of function of major products, seriously affecting the performance and characteristics of the product life.
3.4 Important pieces
An important characteristic of parts or products.
Note 1. The important feature means that if a failure occurs, it will affect the performance and characteristics of the product life.
Note 2. The key pieces of important items and sometimes collectively referred to as the crucial element.
3.5 The key step keyprocess
Product quality play a decisive role in the process. It is the main quality characteristics of the formation process, but also the production process requires strict control
Step.
GB/T 24733-2023 | GB/T 40803-2021 | GB/T 40799-2021 | GB/T 24737.9-2012 | GB/T 24737.4-2012 | GB/T 24737.2-2012 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 24737.6-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 24737.7-2009 — Guide for technological management - Part 7: Technological quota formulation
GB/T 24737.5-2009 — Guide for technological management - Part 5: Design of process procedure
GB/T 24737.8-2009 — Guide for technological management - Part 8: Process verification
Secure payment via Stripe
Payments accepted
GB/T 24737.6-2012
$315.00