GB/T 24737.5-2009Guide for technological management - Part 5: Design of process procedure (English PDF)

3.1 special technical rules

For a certain product or component designed process of order.

3.2 General technical rules

3.2.1 Typical process planning

General Process procedures for a set of structural characteristics and process feature similar components designed.

3.2.2 group process planning

Press group technology principles of the parts are classified into groups, each group of common technical rules for parts of the design.

3.3 standard process planning

Technical rules have been incorporated into the standard.

4 file format and process specification range

4.1 process card

Describe the types of components during processing (or process) the transfer order, mainly for single, small batch production of products.

4.2 Technological card

a description of the transfer order types (or processes) in the step of, for a variety of mass-produced products.

4.3 Step Card

mainly used for high-volume products and one-piece, small batch of key processes.

4.4 Work Instructions

To ensure the quality of a production process, the detailed provisions of the operator should be made of the activities. For operating

Content and requirements essentially the same process (or stations).

4.5 Process Code

a profession should abide by the general operating requirements.

4.6 Inspection card

Important step for critical examination.

4.7 Adjustment card

for automatic, semi-automatic, spiral bevel gear machine tools, automatic production lines and processing.

Figure 4.8 blank. blank for the manufacture of casting, forging and so on.

Assembly Systems Figure 4.9. for the assembly of complex products, and assembly process with the use of the card.

GB/T 24733-2023 | GB/T 40803-2021 | GB/T 40799-2021 | GB/T 24737.6-2012 | GB/T 24737.4-2012 | GB/T 24737.2-2012 | […]