GB/T 24650-2009Agricultural tractor spline shaft - Specifications (English PDF)

1 Scope

This standard specifies the tractor spline shaft of technical requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to tractor spline shaft (hereinafter referred to as the spline shaft), Tractors, agricultural products are not splined shaft can also be implemented by reference.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 230.1 metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T standard

Feet) (GB/T 230.1-2009, ISO 6508-1.2005, MOD)

GB/T 231.1 metallic materials Brinell hardness test - Part 1. Test method (GB/T 231.1-2009, ISO 6506-1.

2005, MOD)

GB/T 275 Rolling Shaft and housing complexes

GB/T 699-1999 quality carbon structural steel

GB/T 1095-2003 flat key keyway cross-sectional dimensions (ASMEB18.25.1M.1996, NEQ)

GB/T 1144 rectangular spline dimensions, tolerances and verification (GB/T 1144-2001, neqISO 14. 1982)

GB/T 1184-1996 shape and position tolerances without individual tolerance value (eqvISO 2768-2. 1989)

GB/T 1800.2-2009 Geometrical product specifications (GPS) limits and fits - Part 2. Standard tolerance grades and holes and shafts

Limit deviations (ISO 286-2. 1988, ISO Systemoflimitsandfits-Part 2. Tablesofstandardtolerance gradesandlimitdeviationsforholesandshafts, MOD)

GB/T 1958 Geometrical Product Specifications (GPS) shape and position tolerance testing requirements

GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1.1999, IDT)

GB/T 3077-1999 alloy structural steel (neqDINEN10083-1.1991)

GB/T 3177 Geometrical product specifications (GPS) smooth workpiece size test

GB/T 3478.1-2008 Straight cylindrical involute splines (Metric module, side fit) - Part 1. General (ISO 4156-

1.2005, MOD)

GB/T 3478.5-2008 Straight cylindrical involute splines (Metric module, side fit) - Part 5. Inspection (ISO 4156-

3.2005, Straightcylindricalinvolutesplines-Metricmodule, sidefit-Part 3. Inspection, MOD)

GB/T 5617 steel induction hardening or flame hardening after the effective hardened layer depth measurement (GB/T 5617-2005, ISO 3754.

1976, NEQ)

GB/T 9450 steel carburized hardened layer depth measurement and verification (GB/T 9450-2005, ISO 2639.2002, MOD)

Microstructure GB/T 13299 Evaluation Method of Steel

GB/T 13320 forging steel Metallographic grading atlas and assessing method

GB/T 15822.2 destructive testing - Magnetic particle testing - Part 2. Detection media (GB/T 15822.2-2005, ISO 9934-2.

2002, IDT) […]