GB/T 24389-2009Noise limits for shearing machinery (English PDF)
剪切机械 噪声限值
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 24389-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 30, 2009
Implementation date
July 1, 2010
Scope
GB/T 24389-2009 is the English-translated version of 剪切机械 噪声限值.
GB/T 24389-2009 is the Chinese standard "Noise limits for shearing machinery". Its scope clause reads: This standard specifies the shear mechanical sound power level and sound pressure level of the noise limits.
This standard applies to mechanical shear, including various types of bar shears, alligator shears, shears, punching shears, United punching Shears. Its clauses include noise limits; measurement.
Found what you need?
Document preview — GB/T 24389-2009
National Standard of the People's Republic of China
- ICS
- 25.120.10
- Classification
- J 62
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 noise limits
- 3.1 bar shears noise limits
- 3.1.1 bar shears sound power level limits
- 3.1.2 bar shears SPL Limit
- 3.2 alligator shears noise limits
1 Scope
This standard specifies the shear mechanical sound power level and sound pressure level of the noise limits.
This standard applies to mechanical shear, including various types of bar shears, alligator shears, shears, punching shears, United punching
Shears.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 23281-2009 forging machinery noise level measurement method
GB/T 23282-2009 forging machinery sound power level measurement
3 noise limits
Shear mechanical noise into sound power level, sound pressure level requirements, and according to the type of cutting machine are given noise limits.
3.1 bar shears noise limits
3.1.1 bar shears sound power level limits
Bar shears during continuous idling noise A-weighted sound power level LWA shall not exceed specified in Table 1.
Table 1
Nominal force bar shearing machine/kN limit sound power level LWA/dB (A)
< 5000110
>=5000 114
3.1.2 bar shears SPL Limit
106dB (A).
3.2 alligator shears noise limits
3.2.1 alligator shears sound power level limits
Alligator shears during continuous idling noise A-weighted sound power level LWA should not exceed 105dB (A).
3.2.2 alligator shears SPL limit
3.3 Noise limits shears
3.3.1 shears sound power level limits
Mechanical transmission shears during continuous idling noise A-weighted sound power level LWA shall not exceed specified in Table 2, hydraulic Shears
Machine during continuous idling noise A-weighted sound power level LWA shall not exceed specified in Table 3.
Table 2
Shears can cut thickness/mm sound power level limit value LWA/dB (A)
<=10 100
> 10 ~ 20103
> 20114
Table 3
Shears Hydraulic pump flow rate/(L/min) sound power level limit value LWA/dB (A)
<=25 94
> 25 to 63100
> 63103
3.3.2 shears SPL Limit
Table 4
<=10 85
> 10 ~ 2090
> 2093
Table 5
<=25 81
> 25 to 6385
> 6390
Specified in Table 6.
Table 6
<=10 101
> 10 ~ 20102
> 20103
3.4 punching shear noise limits
3.4.1 punching shear sound power level limits
Noise A-weighted sound power level LWA punching shear continuous idling time should not exceed 94dB (A).
3.4.2 punching shear SPL Limit
3.5 Ironworkers noise limits
3.5.1 Ironworkers sound power level limits
During continuous idling noise A-weighted sound power level LWA shall not exceed the specified in Table 7.
Table 7
Ironworker can shear thickness/mm sound power level limit value LWA/dB (A)
<=10 97
> 10 ~ 16100
> 16106
3.5.2 Ironworkers SPL Limit
Table 8
<=10 83
> 10 ~ 1686
> 1688
4 Measurement
4.1 SPL Measurement
Noise level measurement method presses shall comply GB/T 23281-2009 of.
4.2 sound power level measurement
Sound power level measurement of the press shall comply with GB/T 23282-2009 of.
4.3 Noise Measurement Description
4.3.1
factory test only measures the noise level.
4.3.2
The new design or improve the design, technology, materials, new products after the noise level should be measured during the performance test; can then measure the noise
Sound power level to the noise level of conformity assessment basis.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 24389-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 24389-2009
$90.00