GB/T 24108-2009Technical requirement of reliability for geotechnical engineering instrument (English PDF)

1 Scope

This standard specifies the general principles, technical requirements, sampling and geotechnical engineering assessment methods to verify the reliability of the instrument, the results of statistical analysis and

Failure determination, test records and reports.

This standard applies to geotechnical engineering instrument product design, development, production and use, it is to determine the geotechnical engineering equipment reliability technology

General Principles requirements.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 2689.1 constant stress life testing and accelerated life testing - General

GB/T 2689.2 Life test and acceleration life test charts - Evaluation (Weibull distribution)

GB/T 2689.3 simple linear life testing and accelerated life testing unbiased estimation (Weibull distribution)

GB/T 2689.4 linear best life testing and accelerated life testing unbiased estimation (Weibull distribution)

GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)

Point and interval estimation method GB/T 5080.4-1985 Equipment reliability testing reliability determination tests (exponential distribution)

GB/T 5080.6-1996 Equipment reliability testing constant failure rate assumption validation

GB/T 5080.7-1986 Equipment reliability testing to verify test failure rate constant failure rate assumption at the time of the average accessibility

Inspection program

GB/T 5081 Electronics site reliability, availability and maintainability data collection guidelines

GB/T 7288.1 Equipment reliability testing - Preferred test conditions indoor portable equipment simulation

GB/T 7288.2 Equipment reliability testing - Preferred test conditions for stationary use in weather protected locations Simulation

GB/T 13264-2008 percent nonconforming small lot sampling inspection procedures and sample forms

GB/T 18185-2000 hydrological instruments reliability technical requirements

3 Terms and Definitions

GB/T 18185-2000 and established the following terms and definitions apply to this standard.