Valid

GB/T 23946-2009Inorganic chemicals for industrial use - General method for the determination of lead content - Atomic absorption spectrometry (English PDF)

无机化工产品中铅含量测定通用方法 原子吸收光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 23946-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 2, 2009

Implementation date

February 1, 2010

Scope

GB/T 23946-2009 is the English-translated version of 无机化工产品中铅含量测定通用方法 原子吸收光谱法.

GB/T 23946-2009 is the Chinese standard "Inorganic chemicals for industrial use - General method for the determination of lead content - Atomic absorption spectrometry".

Its scope clause reads: This standard specifies the general method of determination of lead in inorganic chemical products - the safety tips of atomic absorption spectrometry, generally stipulated, Graphite Furnace Atomic Absorption Spectrometry and Flame Atomic Absorption Spectrometry.

This standard is applicable to the determination of lead in inorganic chemical products by graphite furnace atomic absorption spectrometry and flame atomic absorption spectrometry.

This standard The minimum detection concentration of graphite furnace atomic absorption spectrometry is 5µg/L, and the lowest detection concentration of flame atomic absorption spectrometry is 0.1mg/L. Its clauses include normative reference documents; safety tips; general provisions; graphite furnace atomic absorption spectrometry.

Found what you need?

Document preview — GB/T 23946-2009

National Standard of the People's Republic of China

ICS
71.060.01
Classification
G 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 normative reference documents
  • 3 safety tips
  • 4 General provisions
  • 5 Graphite Furnace Atomic Absorption Spectrometry

1 Scope

This standard specifies the general method of determination of lead in inorganic chemical products - the safety tips of atomic absorption spectrometry, generally stipulated,

Graphite Furnace Atomic Absorption Spectrometry and Flame Atomic Absorption Spectrometry.

This standard is applicable to the determination of lead in inorganic chemical products by graphite furnace atomic absorption spectrometry and flame atomic absorption spectrometry. This standard

The minimum detection concentration of graphite furnace atomic absorption spectrometry is 5µg/L, and the lowest detection concentration of flame atomic absorption spectrometry is

0.1mg/L.

2 normative reference documents

The terms of the following documents are hereby incorporated by reference into this standard. Whichever is the date of the reference file, which is followed by all (Excluding corrigenda) or revisions do not apply to this standard, however, encourage the parties to reach an agreement under this standard

Whether you can use the latest version of these files. For undated references, the latest edition applies to this standard.

GB/T 6682-2008 Analytical laboratory water specifications and test methods (ISO 3696..2008, MOD)

Preparation of Impurity Standard Solution for Chemical Analysis of Inorganic Chemical Products HG/T 3696.2

HG/T 3696.3 Preparation of chemical and analytical preparations for inorganic chemical products

3 safety tips

Some of the reagents used in this test method are toxic or corrosive and the operator should be careful! Such as splashing on the skin should be immediately water

Rinse, severe should be treated immediately.

4 General provisions

The reagents and water used in this standard, when not specified in other requirements, refer to the analysis of pure reagents and GB/T 6682-2008 of the provisions of the two

Water level.

The standard impurity standard solutions, preparations and articles required for the test shall be in accordance with HG/T 3696.2, HG/T 3696.3 when no other requirements are specified

The provisions of the preparation.

5 Graphite Furnace Atomic Absorption Spectrometry

5.1 Principles

The treated test solution is poured into a graphite furnace, and the lead compound is dissociated into a ground state vapor at a high temperature in the atomization stage and

The characteristic lines of the cathode cathode lamp emit selective absorption. The absorbance of lead in the test solution was measured under the optimum optimum conditions of selection. In a

The concentration range, the absorbance value is proportional to the lead content, and the lead content in the sample is obtained by means of a known standard series.

5.2 Reagents

5.2.1 Nitric acid solution

1 + 5.

5.2.2 Ammonium dihydrogen phosphate solution

20g/L.

5.2.3 lead standard solution I

1mL solution containing lead (Pb) 0.1mg.

10 mL of the lead standard solution prepared according to HG/T 3696.2 was placed in a 100 mL volumetric flask and diluted with water

Degree, shake well. Placed in the refrigerator to save, valid for a month.

GB/T 23948-2023 | GB/T 23940-2021 | GB/T 23834.1-2009 | GB/T 23941-2025 | GB/T 23950-2024 | GB/T 23944-2023 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 23946-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 23946-2009

$165.00