GB/T 23836-2009Determination of molybdate in industrial circulating cooling water - Spectrometric method using thiocyanate (English PDF)
工业循环冷却水中钼酸盐含量的测定 硫氰酸盐分光光度法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23836-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 18, 2009
Implementation date
February 1, 2010
Scope
GB/T 23836-2009 is the English-translated version of 工业循环冷却水中钼酸盐含量的测定 硫氰酸盐分光光度法.
GB/T 23836-2009 is the Chinese standard "Determination of molybdate in industrial circulating cooling water - Spectrometric method using thiocyanate". Its scope clause reads: This standard specifies the method for determination of industrial circulating cooling water molybdate content.
This standard applies to the determination in the 100mg/L range 2mg/L ~ in molybdate content. Its clauses include reagents and materials; instruments and equipment.
Found what you need?
Document preview — GB/T 23836-2009
National Standard of the People's Republic of China
- ICS
- 71.040.40
- Classification
- G 76
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 4 Reagents and materials
- 5 instruments and equipment
1 Scope
This standard specifies the method for determination of industrial circulating cooling water molybdate content.
This standard applies to the determination in the 100mg/L range 2mg/L ~ in molybdate content.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD)
Principle 3
Reducing agent ascorbic acid can be reduced to molybdate Mo5 +, under acidic conditions, Mo5 + and thiocyanate complexes formed orange. in
Absorbance was measured at 460nm wavelength of maximum absorption.
4 Reagents and materials
This standard reagents and water, unless otherwise specified, shall use analytical reagent and in line with GB/T 6682 three water requirements.
Safety Tips. The criteria used acid is corrosive, should pay attention. When contacted, rinse with plenty of water, avoid inhaling
Or contact with the skin.
Sulfuric acid solution was 4.1. 1 + 1.
4.2 ferrous ion solution
5g/L.
Weigh 3.51g of ferrous ammonium sulfate [(NH4) 2Fe (SO4) 2 · 6H2O] in 100mL beaker, add 50mL water, was added slowly
4.5mL of sulfuric acid, with stirring. After cooling, dilute with water to 100mL, and mix.
4.3 ascorbic acid solution
100g/L.
10g ascorbic acid dissolved in 100mL of water, shake, stored in a brown bottle in the refrigerator is stable for 15 days.
4.4 ammonium thiocyanate solution
100g/L.
4.5 molybdate stock standard solution
1mL containing 1mgMoO42-.
Weigh 0.7565g sodium molybdate (Na2MoO4 · 2H2O), accurate to 0.2mg, about 200mL water dissolved quantitatively transferred to
500mL volumetric flask, dilute to the mark, shake.
4.6 molybdate standard solution
1mL containing 0.1mgMoO42-.
Take 50.00mL molybdate stock standard solution in 500mL flask, diluted with water to the mark.
5 instruments and equipment
Spectrophotometer. absorption cell with a thickness of 10mm light path.
Step 6 Analysis
6.1 Draw a calibration curve
Pipette 0, respectively (blank), 0.50,1.00,2.00,3.00,4.00,5.00mL molybdate standard solution in seven 50mL volumetric flask
GB/T 16632-2019 | GB/T 22594-2018 | GB/T 22595-2008 | GB/T 31329-2025 | GB/T 23838-2009 | GB/T 23837-2009 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23836-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 23836-2009
$105.00