GB/T 23507.4-2017Criterion for electrical equipment for oil drilling rig—Part 4: Auxiliary power equipment and circuits for well site (English PDF)
石油钻机用电气设备规范 第4部分：辅助用电设备及井场电路
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23507.4-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 23507.4-2017 is the English-translated version of 石油钻机用电气设备规范 第4部分：辅助用电设备及井场电路.
GB/T 23507.4-2017 is the fourth part of the Chinese national specification for the electrical equipment of oil drilling rigs, and it deals with auxiliary power equipment and well site circuits.
It applies to rigs drilling for oil and gas on land and in deserts, and it sets the terms and definitions, the general technical requirements, the auxiliary equipment, the well site circuits, the tests and the rules for marking, packaging and storage.
The general requirements cover service environment, power supply, dielectric strength and earthing resistance, while clause 6 covers the well site distribution unit (MCC), the power and lighting lines and their protection.
Type, factory and system assembly tests are described, and two appendices cover the auxiliary equipment and the lighting of a ZJ70DB rig. It was issued on 29 December 2017 and has applied since 1 July 2018.
Found what you need?
Document preview — GB/T 23507.4-2017
National Standard of the People's Republic of China
- ICS
- 75.180.10
- Classification
- E 92
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General technical requirements
- 4.1 The use of environmental conditions
- 4.2 Power Supply
- 4.3 Dielectric strength
- 4.4 grounding resistance
- 5 Auxiliary power equipment
- 5.1 Technical Requirements
- 5.2 Auxiliary electrical equipment selection and installation in dangerous area of well site
- 5.3 rig main auxiliary electrical equipment configuration
- 6 well field circuit
- 6.1 Well site power distribution device (MCC)
- 6.2 Power Line
- 6.3 Lighting Line
- 6.4 Protection of the line
- 7 Test
- 7.1 Test Classification
- 7.2 type test
- 7.3 factory test
- 7.4 system assembly test project
- 7.5 Assembly test method
- 8 logo, packaging and storage
- Appendix A (informative) ZJ70DB rig auxiliary electrical equipment
- Appendix B (informative) ZJ70DB rig lighting number and distribution
Foreword
GB/T 23507 "Specification for Electrical Equipment for Oil Drilling Rig" is divided into 4 parts.
--- Part 1. Main motor;
--- Part 2. Control system;
--- Part 3. Diesel generator sets for electric drilling rigs;
--- Part 4. Auxiliary power equipment and well field circuit.
This section GB/T 23507 Part 4.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part of the National Petroleum Drilling Equipment and Tools Standardization Technical Committee (SAC/TC96) proposed and managed.
1 Scope
GB/T 23507 provisions of this part of the oil rig auxiliary electrical equipment, well site circuit definition of terms, general technical requirements, auxiliary Electricity equipment, wellsite circuits, tests and signs, packaging and storage.
This section applies to land, desert oil and gas drilling oil rig auxiliary electrical equipment and well field circuit.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 156 standard voltage
GB/T 762 standard current rating
GB/T 3797 electrical control equipment
GB 3836.1 Explosive atmospheres - Part 1: General requirements for equipment
GB 3836.2 Explosive atmospheres - Part 2: Equipment protected by flameproof enclosure "d"
GB 3836.3 Explosive atmospheres - Part 3: Equipment protected by increased safety "e"
GB 3836.4 Explosive atmospheres - Part 4: Equipment protected by intrinsically safe "i"
GB/T 3836.5 Electrical apparatus for explosive gas atmospheres Part 5: Positive pressure housing type "p"
GB 3836.6 Electrical apparatus for explosive gas atmospheres Part 6: Oil-immersed "o"
GB 3836.7 Electrical apparatus for explosive gas atmospheres Part 7: Sand filled "q"
GB 3836.8 Explosive atmospheres - Part 8: Equipment protected by "n" type
GB 3836.9 Explosive atmospheres - Part 9: Equipment protected by sealer "m"
GB 3836.15 Electrical apparatus for explosive gas atmospheres Part 15: Electrical installations in hazardous locations (except mines)
GB/T 3859.2 General requirements for semiconductor converters and commutation converter - Part 1-2 - Application guide
GB/T 4025 man-machine interface logo identifies the basic and safety rules Indicator and operating device coding rules
GB/T 4205 man-machine interface logo basic and safety rules of operation rules
GB/T 4208 enclosure protection (IP code)
GB/T 6995.2 wire and cable identification methods - Part 2: Standard colors
GB 14050 system grounding type and safety technical requirements
Crimping type copper and aluminum terminal blocks and connecting pipes for power cable conductors GB/T 14315-2008
GB/T 16895.6-2014 low-voltage electrical installations Part 5-52. Selection and installation of electrical equipment cabling system
GB/T 23505 oil rig and workover rig
Specification for electrical equipment for oil rigs - Part 2: Control systems
GB 50034 architectural lighting design standards (with the description of the article)
GB 50057 Lightning Protection Design Code (with the text description)
GB 50058-2014 Explosion-Hazardous Electrical Installation Design Specification (Explanation of Terms)
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 156Standard voltages
- GB/T 762Standard current ratings
- GB/T 3797Electrical control assemblies
- GB/T 3836.5Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure 'p'
- GB 3836.6Explosive atmospheres -- Part 6: Equipment protection by liquid immersion 'o'
- GB 3836.15Explosive atmospheresPart 15: Specification of electrical installations design, selection and erection
GB 3836.1 · GB 3836.2 · GB 3836.3 · GB 3836.4 · GB 3836.7 · GB 3836.8 · GB 3836.9 · GB 50034
Similar standards
How to Download GB/T 23507.4-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14050-2008 — Types and safety technical requirements of system earthing
GB 3836.14-2014 — Explosive atmospheres—Part 14: Classification of areas—Explosive gas atmosphere
GB 3836.15-2024 — Explosive atmospheresPart 15: Specification of electrical installations design, selection and erection
Secure payment via Stripe
Payments accepted
GB/T 23507.4-2017
$295.00