Valid

GB/T 23278.4-2009Methods for chemical analysis of sodium stannate - Part 4: Determination of lead content - Flame atomic absorption spectrometry (English PDF)

锡酸钠化学分析方法 第4部分:铅量的测定 原子吸收光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 23278.4-2009 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 5, 2009

Implementation date

November 1, 2009

Scope

GB/T 23278.4-2009 is the English-translated version of 锡酸钠化学分析方法 第4部分:铅量的测定 原子吸收光谱法.

GB/T 23278.4-2009 is the Chinese standard "Methods for chemical analysis of sodium stannate - Part 4: Determination of lead content - Flame atomic absorption spectrometry".

Its scope clause reads: This section GB/T 23278 specifies the method for determination of sodium tin lead content. This section applies to the determination of lead, tin sodium content measured in the range of 0.0010% to 0.0030%. Its clauses include method summary; reagents; instrument; sample.

Found what you need?

Document preview — GB/T 23278.4-2009

National Standard of the People's Republic of China

ICS
71.040.40
Classification
G 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Method summary
  • 3 Reagents
  • 4 Instrument
  • 5 Sample

1 Scope

This section GB/T 23278 specifies the method for determination of sodium tin lead content.

This section applies to the determination of lead, tin sodium content measured in the range of 0.0010% to 0.0030%.

2 Method summary

Sample decomposition with aqua regia, in 10% aqua regia medium flame atomic absorption spectrometer at a wavelength of 283.3nm, air - acetylene fire

Determination of flame.

3 Reagents

Test water for the three distilled water.

Nitrate 3.1 (rho1.42g/mL).

3.2

hydrochloride (rho1.19g/mL).

3.3

aqua regia.

3.4 lead standard stock solution

Weigh 0.5000g metallic lead (mass fraction >=99.999%), placed in 200mL beaker, add

20mL (1 + 2) nitric acid, heat gently to dissolve, remove the cooled and transferred to 1000mL volumetric flask, dilute with water to volume, and mix. This solution 1mL

Containing 500µg lead.

3.5 Lead standard solution

Pipette 20.00mL lead standard stock solution (3.4) in 200mL flask, add 5mL hydrochloric acid (3.2), with

Dilute with water to volume, and mix. This solution 1mL containing 50µg lead.

4 Instrument

Atomic absorption spectrometer, with a lead hollow cathode lamp, deuterium lamp.

Under optimum working conditions for those who can reach the following indicators can be used.

--- Characteristic concentration. a solution in the matrix is consistent with the measured solution, characteristic concentration of lead should not exceed 0.12µg/mL;

--- Precision. measure 10 times the absorbance of the highest concentration of the standard solution, the standard deviation should not exceed 1% of the average absorbance; with

The lowest concentration of standard solution (not "zero" concentration of the standard) measuring the absorbance of 10 times, the standard deviation should not exceed the maximum concentration

0.5% of the mean absorbance of the standard solution;

--- Linear curve. A standard curve is divided into five sections according to concentration, absorbance difference of the absorbance difference between the highest and the lowest segment segment

Ratio of not less than 0.7.

5 Sample

The sample should be sealed packaging.

Step 6 Analysis

6.1 Sample

Weigh 2.0g sample (m1), accurate to 0.0001g.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 23278.4-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 23278.4-2009

$85.00