GB/T 23278.3-2009Methods for chemical analysis of sodium stannate - Part 3: Determination of arsenic content - Molybdoantimonyarsenate blue spectrophotometric method (English PDF)
锡酸钠化学分析方法 第3部分:砷量的测定 砷锑钼蓝分光光度法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23278.3-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 5, 2009
Implementation date
November 1, 2009
Scope
GB/T 23278.3-2009 is the English-translated version of 锡酸钠化学分析方法 第3部分:砷量的测定 砷锑钼蓝分光光度法.
GB/T 23278.3-2009 is the Chinese standard "Methods for chemical analysis of sodium stannate - Part 3: Determination of arsenic content - Molybdoantimonyarsenate blue spectrophotometric method".
Its scope clause reads: This section GB/T 23278 specifies the determination of tin in sodium arsenic content. This section applies to the determination of tin in sodium arsenic content was measured in the range of 0.0002% to 0.005%. Its clauses include method summary; reagents and apparatus.
Found what you need?
Document preview — GB/T 23278.3-2009
National Standard of the People's Republic of China
- ICS
- 71.040.40
- Classification
- G 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Method summary
- 3 Reagents and apparatus
- 3.8 stannous chloride solution (400g/L)
- 3.9 absorption solution (2g/L)
- 3.10 ascorbic acid solution (30g/L)
- 3.13 color solution
- 3.14 arsenic standard stock solution
- 3.15 Arsenic standard solution
1 Scope
This section GB/T 23278 specifies the determination of tin in sodium arsenic content.
This section applies to the determination of tin in sodium arsenic content was measured in the range of 0.0002% to 0.005%.
2 Method summary
The sample is dissolved in water, dilute sulfuric acid medium with stannous chloride, zinc metal arsenic is reduced to arsine gas, iodine - potassium iodide solution suction
Income, arsenic and antimony, molybdenum, antimony molybdenum blue blue generated at a wavelength of 700nm spectrophotometer measured absorbance.
3 Reagents and apparatus
Test water are three of distilled water.
3.1
arsenic-free zinc particles (u00d83mm ~ u00d87mm).
3.2
sulfate (rho1.84g/mL).
3.3
sulfate (1 + 1).
3.4
sulfate (1 + 6).
3.5
hydrochloride (rho1.19g/mL).
3.6
HCl (1 + 1).
3.7
tartaric acid solution (300g/L).
3.8 stannous chloride solution (400g/L)
Weigh 40g of stannous chloride (SnCl2 · 2H2O) in 200mL beaker, add approximately 80mL of hydrochloric acid (3.5), cover the dish table, micro heat of solution is completely clear, and cooled to room temperature, hydrochloric acid (3.6) diluted to 100mL, and mix.
3.9 absorption solution (2g/L)
Weigh 1g and 5g potassium iodine tablets mixed, dissolved in water and diluted to 500mL.
3.10 ascorbic acid solution (30g/L)
now with the current.
3.11
ammonium molybdate solution (40g/L).
3.12
antimony potassium tartrate solution (4.5g/L).
3.13 color solution
Take 50mL sulfuric acid (3.4), 25mL ascorbic acid solution (3.10), 20mL ammonium molybdate solution (3.11), 5mL
Antimony potassium tartrate solution (3.12) and mix. The time is now equipped with.
3.14 arsenic standard stock solution
Weigh 0.1320g trioxide (pre-drying to a constant weight at 105 °C ± 5 °C, the reference reagent) to
150mL beaker, 10mL sodium hydroxide solution (200g/L) dissolved, 5mL of sulfuric acid (3.3), 0.5mL of hydrogen peroxide (30%),
Heated to boiling for 10min, cooled to room temperature. Moved into 1000mL volumetric flask, dilute with water to volume, and mix. This solution containing 1mL
100µg arsenic.
3.15 Arsenic standard solution
Pipette 25.00mL arsenic standard stock solution, placed in 500mL volumetric flask, dilute with water to volume, and mix.
This solution 1mL containing 5µg arsenic.
3.16
arsine occurred and absorption device (see Figure 1).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23278.3-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 23278.4-2009 — Methods for chemical analysis of sodium stannate - Part 4: Determination of lead content - Flame atomic absorption spectrometry
GB/T 23278.2-2009 — Methods for chemical analysis of sodium stannate - Part 2: Determination of iron content - 1, 10-phenanthroline photometric method
GB/T 23278.5-2009 — Methods for chemical analysis of sodium stannate - Part 5: Determination of antimony content - Malachite green photometric method
GB/T 23278.3-2009
$85.00