GB/T 23274.8-2009Methods for chemical analysis of stannic oxide - Part 8: Determination of loss on ignition - Gravimetric method (English PDF)
二氧化锡化学分析方法 第8部分:灼烧失重的测定 重量法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23274.8-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 5, 2009
Implementation date
November 1, 2009
Scope
GB/T 23274.8-2009 is the English-translated version of 二氧化锡化学分析方法 第8部分:灼烧失重的测定 重量法.
GB/T 23274.8-2009 is the Chinese standard "Methods for chemical analysis of stannic oxide - Part 8: Determination of loss on ignition - Gravimetric method". Its scope clause reads: GB/T 23274 standard specifies the method for the determination of the tin dioxide ignition loss.
This standard applies to the determination of tin dioxide ignition loss was measured in the range of 0.010% to 1.00%. Its clauses include principle of the method; sample.
Found what you need?
Document preview — GB/T 23274.8-2009
National Standard of the People's Republic of China
- ICS
- 71.040.40
- Classification
- G 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 principle of the method
- 3 Sample
- 4.2 Determination
- 6.1 Repeatability
1 Scope
GB/T 23274 standard specifies the method for the determination of the tin dioxide ignition loss.
This standard applies to the determination of tin dioxide ignition loss was measured in the range of 0.010% to 1.00%.
2 principle of the method
Sample is placed in 105 °C oven after removal of a small amount of moisture adsorption of natural and placed 800 °C high temperature furnace burning 30min, the dryer
Cooled to room temperature, and weighed.
3 Sample
The sample should be sealed packaging. Require prior sample in an oven at 105 °C, the drying after 1h, out into the dryer to cool to room temperature.
spare.
Step 4 Analysis 4.1 Determination of the number of
Independently two determinations, the mean value.
4.2 Determination
4.2.1
Weigh 10.0g sample (3) (m1, accurate to 0.0001g,), placed in 30mL constant weight porcelain crucible (m1).
4.2.2
The porcelain crucible into the furnace has been heated to a high temperature of 800 °C, burning for 30min, then cooled at room temperature 12min ~ 2min, set
Cooling in a desiccator 30min, weighed (m1 2).
Calculation results of the analysis of 5
According to equation (1) calculate the ignition loss of mass fraction, expressed in%.
W1 m1 = m1 + 1- 2 m1 m1 × 100 (1)
Where.
M1 --- porcelain crucible mass in grams (g);
M1 2 --- quality porcelain crucible and residue on ignition in grams (g);
M1 --- quality of sample in grams (g).
The results are expressed to three decimal places.
6 precision
6.1 Repeatability
Found two independent test results obtained under repeatability conditions within the average range given below, these two test results
Interpolation obtained.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23274.8-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 23274.7-2009 — Methods for chemical analysis of stannic oxide - Part 7: Determination of soluable matter in hydrochloric acid - Gravimetric method
GB/T 23274.6-2009 — Methods for chemical analysis of stannic oxide - Part 6: Determination of sulfate content - Visual turbidimetry method
GB/T 23274.5-2009 — Methods for chemical analysis of stannic oxide - Part 5: Determination of antimony content - Malachite green photometric method
GB/T 23274.8-2009
$75.00