GB/T 23274.6-2009Methods for chemical analysis of stannic oxide - Part 6: Determination of sulfate content - Visual turbidimetry method (English PDF)
二氧化锡化学分析方法 第6部分:硫酸盐的测定 目视比浊法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23274.6-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 5, 2009
Implementation date
November 1, 2009
Scope
GB/T 23274.6-2009 is the English-translated version of 二氧化锡化学分析方法 第6部分:硫酸盐的测定 目视比浊法.
GB/T 23274.6-2009 is the Chinese standard "Methods for chemical analysis of stannic oxide - Part 6: Determination of sulfate content - Visual turbidimetry method".
Its scope clause reads: This section GB/T 23274.6 specifies the method for determination of tin dioxide sulfate. This section applies to the determination of sulfate in tin dioxide, measured in the range of 0.030% to 0.60%. Its clauses include method summary; reagents; sample.
Found what you need?
Document preview — GB/T 23274.6-2009
National Standard of the People's Republic of China
- ICS
- 71.040.40
- Classification
- G 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Method summary
- 3 Reagents
- 4 Sample
1 Scope
This section GB/T 23274.6 specifies the method for determination of tin dioxide sulfate.
This section applies to the determination of sulfate in tin dioxide, measured in the range of 0.030% to 0.60%.
2 Method summary
Sample decomposition with sodium hydroxide melt, hydrochloric acid leaching in acidic medium, add barium chloride to generate white precipitate barium sulfate, visually matching
Turbidity measurement.
3 Reagents
Test water are a distilled water.
3.1
Sodium hydroxide (GR).
3.2
hydrochloride (rho1.19g/mL).
3.3
HCl (1 + 1).
3.4
ethanol.
3.5 barium chloride solution (250g/L)
Use filtered.
3.6 sulfate standard stock solution
Weigh 0.1480g anhydrous sodium sulfate (at 105 °C ~ 110 °C drying to constant weight) dissolved in water and transferred to
1000mL volumetric flask, and dilute to volume, and mix. This solution 1mL containing 100µg sulfate (SO4
2-).
3.7 sulfate standard solution
Pipette 50.00mL sulfate standard stock solution (3.6) in 100mL flask, diluted with water to the mark
Degree, and mix. This solution 1mL containing 50µg sulfate (SO4
2-).
3.8 sulfate standard solution
Pipette 50.00mL sulfate standard stock solution (3.6) in 500mL volumetric flask, dilute to the mark with water
Degree, and mix. This solution 1mL containing 10µg sulfate (SO4
2-).
4 Sample
The sample should be sealed packaging.
Step 5 Analysis 5.1 Determination of the number of
Independently two determinations, the mean value.
5.2 blank test
Along with sample blank test.
5.3 Determination
5.3.1
Weigh 0.5g sample (m1), accurate to 0.0001g, placed in pre-filled with 1g of sodium hydroxide (3.1) of 30mL silver crucible,
Then covered with 1g of sodium hydroxide (3.1, if you need to cover larger particles 2g). Moved to 400 °C high temperature furnace, heated to 600 °C decomposition
10min, then cool. Blowing about 5mL water in a silver crucible, placed in a heating until completely dissolved melt on a hot plate.
5.3.2
the test solution with a small amount of water transferred to 100mL beaker was added 10mL of hydrochloric acid (3.2), was heated to a clear test solution, after cooling transferred […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23274.6-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 23274.7-2009 — Methods for chemical analysis of stannic oxide - Part 7: Determination of soluable matter in hydrochloric acid - Gravimetric method
GB/T 23274.5-2009 — Methods for chemical analysis of stannic oxide - Part 5: Determination of antimony content - Malachite green photometric method
GB/T 23274.8-2009 — Methods for chemical analysis of stannic oxide - Part 8: Determination of loss on ignition - Gravimetric method
GB/T 23274.6-2009
$75.00