GB/T 22784-2008Determination of essential parameters of aluminum-magnesium alloy powder for use in fireworks and firecrackers (English PDF)
烟花爆竹用铝镁合金粉关键指标的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 22784-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2008
Implementation date
September 1, 2009
Scope
GB/T 22784-2008 is the English-translated version of 烟花爆竹用铝镁合金粉关键指标的测定.
GB/T 22784-2008 is the Chinese standard "Determination of essential parameters of aluminum-magnesium alloy powder for use in fireworks and firecrackers".
Its scope clause reads: This standard specifies the fireworks with aluminum-magnesium alloy powder in hydrochloric acid insoluble matter content, moisture content, particle size, the content of aluminum, iron content and magnesium content And determination of the activity of aluminum and magnesium.
This standard applies to fireworks with aluminum-magnesium alloy powder in hydrochloric acid insoluble matter content, moisture content, particle size, the content of aluminum, iron content and magnesium content And determination of the activity of aluminum and magnesium. Its clauses include determination.
Found what you need?
Document preview — GB/T 22784-2008
National Standard of the People's Republic of China
- ICS
- 71.100.30
- Classification
- Y 88
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Determination
- 3.1 drying the sample
- 3.2 Determination of hydrochloric acid insoluble content
1 Scope
This standard specifies the fireworks with aluminum-magnesium alloy powder in hydrochloric acid insoluble matter content, moisture content, particle size, the content of aluminum, iron content and magnesium content
And determination of the activity of aluminum and magnesium.
This standard applies to fireworks with aluminum-magnesium alloy powder in hydrochloric acid insoluble matter content, moisture content, particle size, the content of aluminum, iron content and magnesium content
And determination of the activity of aluminum and magnesium.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
Preparation of GB/T 601 chemical reagent standard titration solution
General Method GB/T 3049 Industrial chemicals determination of iron content 1,10 Philippines spectrophotometry method (GB/T 3049-
2006, ISO 6685. 1982, IDT)
GB/T 6003.1 woven wire mesh test sieve (GB/T 6003.1-1997, eqv ISO 3310-1.1990)
GB/T 6003.2 Test sieves of perforated metal plate (GB/T 6003.2-1997, eqv ISO 3310-2.1990)
GB/T 6003.3 electroformed sheet test sieve (GB/T 6003.3-1999, eqv ISO 3310-3.1990)
Basic dimensions GB/T 6005 Test sieves - Metal wire cloth, perforated plate and electroformed sheet mesh (GB/T 6005-
2008, ISO 565.1990, MOD)
GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD)
GB/T 8170 repair value expressed about the rules and limit values and judgment
Preparation of standard titration solution of HG/T 3696.1 inorganic chemical products, chemical analysis
3 Determination
3.1 drying the sample
The sample was dried at 105 °C 3h, into the dryer to cool reserve. After drying the sample project water supply points other than the use of detection.
3.2 Determination of hydrochloric acid insoluble content
3.2.1 Principle
After the sample is dissolved hydrochloric acid by filtration, dried insolubles, call quality.
3.2.2 Reagents
Unless otherwise indicated in the analysis using only confirm the order of at least analytical grade reagents and GB/T 6682-1992 specified in 3
Water;
Hydrochloric acid (1 + 1).
3.2.3 Instruments
Usual laboratory equipment and the following devices.
3.2.3.1 Drying oven
Controlled temperature 105 °C ± 2 °C.
3.2.3.2 Analytical balance
accuracy of 0.1mg.
Dry 3h, removed, placed in a desiccator, cooled to room temperature and set aside.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 22784-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 22784-2008
$135.00