GB/T 22265-2008Direct acting indicating analogue max-demand ammeters (English PDF)

1 Scope

Direct Interaction Simulation 1.1 standard for measuring the maximum demand current in an AC circuit DC circuit or display electrical measuring instruments.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 1242-2000 mounted indicating and recording electrical measuring instruments and the size (neqIEC 61554.1999)

GB/T 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements (IEC 61010-1.2001, IDT)

GB/T 5169.11-2006 Fire hazard testing for electric and electronic products - Part 11. Glowing/hot-wire based test methods to

Glow-wire flammability test method article

GB/T 7676.1-1998 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1. Definitions and general requirements (Idt IEC 60051-1. 1984)

GB/T 7676.2-1998 Direct acting indicating analogue electrical measuring instruments and their accessories Part 2. Special ammeter and voltmeter

Specific requirements (idt IEC 60051-2. 1984)

GB/T 7676.9-1998 Direct acting indicating analogue electrical measuring instruments and their accessories Part 9. Recommended test methods (Idt IEC 60051-9. 1988)

IEC 60068 Basic environmental testing procedures

3 Terms and Definitions

GB/T 7676.1 and established the following terms and definitions apply to this standard.

The alternating current flow in this standard are rms (r.m.s.).