GB/T 22044-2017Anthropometric definitions and methods for infants garment (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 22044-2008 "body parts and methods for infant and young child clothing," and GB/T 22044-2008 phase Than the main changes are as follows:

--- Modify the standard Chinese and English names (see cover,.2008 edition of the cover);

--- Modify the standard range (see Chapter 1,.2008 edition of Chapter 1);

--- Modify the normative references (see Chapter 2, Chapter 2 of the.2008 edition);

--- Supplement the definition of the measurement sequence (see Chapter 3);

--- Modify the horizontal size of the "head circumference" "shoulder length" "chest width" "upper arm circumference" "thighs" "knee" "ankle" and the definition (see 3.2.1.3.3.2.3.3.3.2.5.3.3.2.3.3.2.12.3.3.2.3.3.2.15.2008 Edition 3.1.1, 3.1.3, 3.1.5, 3.1.10, 3.1.13 , 3.1.14, 3.1.16);

--- Remove the vertical size of the measured position measurement "lying on the table" (see 3.3,.2008 edition 3.2);

--- Modify the vertical size of the head and neck length, the length of the cervical vertebrae, armor circumference, hand length, etc. (see 3.3.2, 3.3.9, 3.3.17, 3.3.23, 2008 edition 3.2.2, 3.2.9, 3.1.9, 3.3.2);

--- Modify the name of the size definition (see 3.3.9.3.3.3.17.3.3.19.3.3.21,.2008 edition 3.2.9,3.1.9,3.2.18, 3.2.20);

--- Adjust the length of other sizes of hand, palm circumference, foot length, foot width to vertical dimensions (see 3.3.3.3.3.3.23.3.35.3.3.26,2008 Editions 3.3.2, 3.3.3, 3.3.4, 3.3.5);

--- Modify the definition of the relevant size of the English name of the name (see Chapter 3,.2008 Edition Chapter 3);

--- Incorporating measurement tools (see 4.1, Chapter 4 of the.2008 edition);

--- Modify the measurement conditions and requirements (see 4.2,.2008 Edition Chapter 5). This standard proposed by the China Textile Industry Federation. This standard by the National Standardization Technical Committee clothing (SAC/TC219) centralized. The main drafting units of this standard. Shanghai Textile Group Testing Standards Co., Ltd., Guangzhou Fiber Products Testing Institute, Embry (China) Garment Co., Ltd., Qingdao Cool Intelligent Co., Ltd. The main drafters of this standard. Yang Xiuyue, Liu Wenli, Zhou Double Happiness, Cao Haihui, Ge Li. This standard replaces the standards previously issued as.

--- GB/T 22044-2008. Infant clothing measured by human body Size definition and method

1 Scope

GB/T 22044-2017 is the Chinese national standard on anthropometric definitions and methods for infants garment, in the field of clothing industry. The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up - which in practice is how most foreign buyers meet it. It was issued on 29 December 2017 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 July 2018. Classification: ICS 61.020, CCS Y75. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there. The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.

This standard specifies the dimensions and methods of infant measurement of body measurements. This standard applies to the age of 36 months and below infants body measurement. NOTE Not all of the body sizes defined in this standard are required for the production of baby clothes.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 16160 Garment size and definition of human measurement methods

3 Size definition

3.1 Overview The size definitions are listed in the natural order of measurement and include the following three sections.

a) the horizontal size (including the size of the circumference);

b) vertical size;

c) other dimensions. The order of vertical dimensions is measured, starting with the size of the human body measured with a human altimeter and then with the size of the human body measured with a soft ruler. Note The instruments and measurement methods mentioned in the definition are specified in Chapter 4.

3.2 horizontal size

3.2.1 Head circumference headband Subjects were upright, the head facing the front, with a soft ruler around the top of the eyebrow around the pillow after measuring the maximum horizontal circumference measured hair Included.

3.2.2 Neck circumference neck-basegirth The seventh cervical vertebra point, the lateral neck point and neck densitometry measured neck circumference.

3.2.3 Shoulder length shoulderlength Subjects arm drooping naturally, measured from the lateral neck point to the acromion point body distance.

3.2.4 Total shoulder backshoulderwidth Subjects arm drooping naturally, measuring the horizontal arc length between the acromion points.