GB/T 21745-2008Ration of workers for manufacturing rail traffic engineering components (English PDF)
轨道交通工程构件制造劳动定员定额
This is a limited preview
Buy now to download the full PDF (33 pages)
Need quotation for your management?
Get a formal quotation for GB/T 21745-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 5, 2008
Implementation date
July 1, 2008
Scope
GB/T 21745-2008 is the English-translated version of 轨道交通工程构件制造劳动定员定额.
GB/T 21745-2008 is the Chinese standard "Ration of workers for manufacturing rail traffic engineering components".
Its scope clause reads: This standard specifies the various rail projects in steel bridges, processing, manufacturing, installation, Pedestal straddle, straddle articulated Turnout, turnout and processing all kinds of high-speed maglev rail beam functional parts, labor quota low speed maglev track panel manufacturing capacity and job content.
This standard applies to all kinds of steel rail transit project, turnout products manufacturing and other projects in labor management. Its clauses include rail traffic engineering component manufacturing work quota.
Found what you need?
Document preview — GB/T 21745-2008
National Standard of the People's Republic of China
- ICS
- 03.100.30
- Classification
- S 02
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 rail traffic engineering component manufacturing Work Quota
- 2.1 parts processing component product
- 2.2 component manufacturing, installation
- 3 Rail Transit Project straddle Pedestal
- 3.1 component manufacturing
- 3.2 Steel Manufacturing
- 4 Light Rail Transit Project straddle Joint Turnouts
- 4.1 component manufacturing
- 4.2 Machining
- 4.3 Turnout assembly
- 4.4 installation site
- 5 Rail Transit Project Turnout manufacture
- 5.1 parts processing rail
- 5.2 Frog high manganese steel manufacturing, processing
- 5.3 Turnout coupling of processing
- 6-speed maglev rail project features 44 beam
- 6.1 component manufacturing
- 6.2 overall machining
- 6.3 Painting
- 6.4 track beam machining
- 7 Rail Transit Project low speed maglev track panel
- 7.1 component manufacturing
- 7.2 Machining
- 7.3 overall assembly, painting, engraving mark
- 7.4 installation site
- Appendix A (normative) the relevant provisions of
1 Scope
This standard specifies the various rail projects in steel bridges, processing, manufacturing, installation, Pedestal straddle, straddle articulated
Turnout, turnout and processing all kinds of high-speed maglev rail beam functional parts, labor quota low speed maglev track panel manufacturing capacity and job content.
This standard applies to all kinds of steel rail transit project, turnout products manufacturing and other projects in labor management.
2 rail traffic engineering component manufacturing Work Quota
2.1 parts processing component product
2.1.1 plate pretreatment
a) Work. Unit with steel, finisher, remove oxide, spray primer, drying, stacking.
b) man-days fixed in Table 1.
c) Based on the above work content corresponding configuration in accordance with professional grade technical staff of 11 people.
Table 1 plate pretreatment units of man-days per tonne
Flat rolled steel project
Steel rust
Machinery painting
Quota 0.0417 0.0417 0.0417
2.1.2 for sample
a) Work. handmade-like rod model.
b) fixed working hours are shown in Table 2.
Staff c) According to the above steps to configure the appropriate level of expertise in line with a total of 2 people.
Table 2 as the sample in minutes per tonne
Handmade items like rods, model
10.8 Quota
Note. The table handmade sample rods, model ton tonnage means the product.
2.1.3 crossed
a) Work. according to process requirements for steel and steel scribe.
b) fixed working hours are shown in Table 3.
c) According to the above steps to configure the appropriate level of compliance with professional and technical staff of six people.
Table 3 dash in minutes each project
Plate width/mm
1,002,004,006,009,001,200 1500 1800
Plate length / mm
100 0.500 1.00 2.00 3.00 4.00 5.00 5.50 6.00
300 1.00 2.00 2.50 3.50 5.00 6.00 7.00 8.00
600 2.00 2.50 3.00 4.00 5.50 6.50 8.00 9.00
1000 2.50 3.00 3.50 4.50 6.00 7.00 8.50 10.0
GB/T 21562.2-2015 | GB/T 21562.3-2015 | TB 10054-2010 | GB/T 21744-2008 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 33 pages — is available in the English PDF.
Similar standards
How to Download GB/T 21745-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 21745-2008
$500.00