GB/T 21502-2008Starting device (English PDF)
发令器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 21502-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 13, 2008
Implementation date
May 1, 2008
Scope
GB/T 21502-2008 is the English-translated version of 发令器.
GB/T 21502-2008 is the Chinese standard "Starting device". Its scope clause reads: This standard specifies the classification of issuing the order, requirements, test methods, inspection rules, marking, packaging, transportation and storage and other content.
This standard applies to issuing the order the design, manufacture and acceptance. Its clauses include terms and definitions; requirements.
Found what you need?
Document preview — GB/T 21502-2008
National Standard of the People's Republic of China
- ICS
- 97.220.99
- Classification
- Y 56
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 5 Requirements
1 Scope
This standard specifies the classification of issuing the order, requirements, test methods, inspection rules, marking, packaging, transportation and storage and other content.
This standard applies to issuing the order the design, manufacture and acceptance.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2000, eqv ISO 780.1997)
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample
Programme (ISO 2859-1.1999, IDT)
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Track, swimming competitions at the start of firing shells audible issuing the order and (or) smoke signal equipment.
Category 4
Issuing the order is structured into. Magazine has issued orders and no magazine is issuing the order.
5 Requirements
5.1 Appearance quality
Hair color so that the surface should be uniform, there should be a clear piebald, scrapes, scratches and other defects.
5.2 Dimensions
Issuing the order size should meet product design requirements.
5.3 assembly
Is issuing the order the parts should be assembled correctly and securely in place, all moving parts should be flexible movement after assembly, empty chamber when firing action agencies should
Accurate and reliable.
5.4 Design
5.4.1
issuing the order of the container shall be not less than the amount of playing two rounds, and continuous firing.
5.4.2
Design of issuing the order should have anti-reform, that is issuing the order the magazine or the chamber should be prevented after being restructured for loading small caliber bullet,
Or filling small-caliber bullets can not be fired after issuing the order.
5.4.3
Outline issuing the order should not have the military and police with a pistol of similar simulation.
5.4.4
Design of issuing the order to be considered error-proofing device installed leak-proof and feature components. In the case of an error component assembly should not be completed
Assembly; in the case of missing equipment parts firing issuing the order should not be playing.
5.5 Performance
5.5.1 firing function
5.5.1.1
issuing the order should be smooth loading.
GB/T 22048-2022 | SN/T 0869-2017 | GB/T 21268-2014 | GB/T 20045-2026 | GB/T 11881-2026 | GB/T 21503-2008 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 21502-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 21502-2008
$90.00