Valid

GB/T 21315-2007Determination of penicillins residues in foodstuffs animal origin - LC-MS/MS method (English PDF)

动物源性食品中青霉素族抗生素残留量检测方法 液相色谱-质谱/质谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 21315-2007 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 29, 2007

Implementation date

April 1, 2008

Scope

GB/T 21315-2007 is the English-translated version of 动物源性食品中青霉素族抗生素残留量检测方法 液相色谱-质谱/质谱法.

GB/T 21315-2007 is the Chinese standard "Determination of penicillins residues in foodstuffs of animal origin - LC-MS/MS method". Its scope clause reads: This Standard specifies the determination and confirmation of LC-MS/MS method for penicillins residues in foodstuffs of animal origin.

This Standard applies to the determination of 11 penicillins residues of amoxicyllin, ampicillin, cloxacillin, dicloxacillin, nafcillin, oxacillin, gpenicillin, penicillin, azlocillin, methicillin, phenethicillin in pig muscles, pig liver, pig kidneys, milk, and eggs.

Its clauses include principles; reagents and materials; instruments; sample preparation and storage; determination procedures; calculation and expression of results; limit of quantitation and recovery rate.

It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on OCTOBER 29, 2007 and took effect on APRIL 01, 2008.

Found what you need?

Document preview — GB/T 21315-2007

National Standard of the People's Republic of China

ICS
67.120
Classification
X 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • 1 Scope4
  • 2 Normative references4
  • 3 Principles4
  • 4 Reagents and materials4
  • 5 Instruments6
  • 6 Sample preparation and storage6
  • 7 Determination procedures6
  • 8 Calculation and expression of results9
  • 9 Limit of quantitation and recovery rate10
  • Appendix A (Informative) Reference mass spectrometry conditions for mass spectrometry/mass spectrometry determination11
  • Appendix B (Informative) Reconstructed ion chromatogram of quantitative ion pairs of 11 penicillins standards13
  • Appendix C (Informative) Addition recovery rate15

1 Scope

This Standard specifies the determination and confirmation of LC-MS/MS method for penicillins residues in foodstuffs of animal origin.

This Standard applies to the determination of 11 penicillins residues of amoxicyllin, ampicillin, cloxacillin, dicloxacillin, nafcillin, oxacillin, gpenicillin, penicillin, azlocillin, methicillin, phenethicillin in pig muscles, pig liver, pig kidneys, milk, and eggs.

2 Normative references

The following documents contain provisions which, through reference in this Standard, constitute provisions of this Standard. For the dated references, their subsequent amendments (excluding corrections) or revisions do not apply to this Standard. However, the parties who enter into agreement based on this Standard are encouraged to investigate whether the latest editions of these documents are applicable. For undated reference documents, the latest editions apply to this Standard.

GB/T 6682-1992 Water for analytical laboratory use - Specification and test methods (neq ISO 3696:1987)

3 Principles

The penicillins residues in the sample are extracted using acetonitrile-water solution. After the extract is concentrated, USE a buffer solution to dissolve and a solid-phase extraction cartridge to purify. After the eluent is blow-dried by nitrogen, USE liquid chromatography-mass spectrometry/mass spectrometry to determine; USE external standard method to quantify.

4 Reagents and materials

Unless otherwise stated, the reagents used are of analytical pure; and the water is the Grade 1 water specified in GB/T 6682-1992.

WEIGH about 5 g (accurate to 0.01 g) of sample in a 50 mL centrifuge tube;

ADD 15 mL of acetonitrile-water solution (4.9); homogenize for 30 s;

CENTRIFUGE at 4000 r/min for 5 min; TRANSFER the supernatant to a 50 mL centrifuge tube. TAKE another centrifuge tube; ADD 10 mL of acetonitrile-water solution (4.9); WASH the homogenizer head. USE a glass rod to mash the precipitate in the centrifuge tube; ADD the above-mentioned washing homogenizer head solution; oscillate on a vortex mixer for 1 min; CENTRIFUGE at 4000 r/min for 5 min. The supernatant is combined into a 50 mL centrifuge tube. The head is washed repeatedly using 10 mL of acetonitrile-water solution (4.9) and extracted once. The supernatant is combined into a 50 mL centrifuge tube. USE acetonitrile-water solution (4.9) to dilute to 40 mL. Accurately PIPETTE 20 mL into a 100 mL heart-shaped bottle.

7 Determination procedures

7.1.2 Milk sample

WEIGH 10 g (accurate to 0.01 g) of sample in a 50 mL centrifuge tube; ADD 20 mL of acetonitrile (4.9); homogeneous extraction for 30 s; CENTRIFUGE at 4000 r/min for 5 min; TRANSFER the supernatant to a 50 mL centrifuge tube.

TAKE another centrifuge tube; ADD 10 mL of acetonitrile-water solution (4.9);

WASH the homogenizer head. USE a glass rod to mash the precipitate in the centrifuge tube; ADD the above-mentioned washing homogenizer head solution; oscillate on a vortex mixer for 1 min; CENTRIFUGE at 4000 r/min for 5 min.

The supernatant is combined into a 50 mL centrifuge tube. The head is washed repeatedly using 10 mL of acetonitrile-water solution (4.9) and extracted once.

The supernatant is combined into a 50 mL centrifuge tube. USE acetonitrile-water solution (4.9) to dilute to 50 mL. Accurately PIPETTE 25 mL into a 100 mL heart-shaped bottle.

The heart-shaped bottle is evaporated on a rotary evaporator (37 °C water bath) to remove acetonitrile (Easy-to-foam sample can be added with 4 mL of saturated sodium chloride solution).

7.2 Purification

Immediately ADD 25 mL of phosphate buffer solution (4.11) to the heart-shaped bottle from which acetonitrile has been removed; vortex-mix for 1 min; USE 0.1 mol/L sodium hydroxide to adjust the pH to 8.5. At a rate of 1 mL/min, PASS the pretreated solid-phase extraction cartridge; first USE 2 mL of phosphate buffer solution (4.11) to rinse twice; then USE 1 mL of ultrapure water to rinse; and USE 3 mL of acetonitrile to elute (The speed is controlled at 1 mL/min).

The eluent, at 45 °C, is blown dry with nitrogen. USE 0.025 mol/L phosphate buffer solution (4.12) to dilute to 1 mL. After passing through a 0.45 µm filter membrane, immediately USE liquid chromatograph-mass spectrometer/mass spectrometer to determine. reference retention time of 11 penicillins is approximately: amoxicyllin 8.5 min, ampicillin 12.2 min, azlocillin 16.5 min, methicillin 16.8 min, gpenicillin 18.1 min, penicillin 19.4 min, oxacillin 20.3 min, phenethicillin 20.5 min, cloxacillin 21.5 min, nafcillin 22.3 min, dicloxacillin 23.5 min. The reconstructed ion chromatogram of the quantitative ion pair of penicillins standard solutions is shown in Figure B.1.

7.3.4 Qualitative determination

According to the above conditions, the sample is determined; and a standard working curve is established. If the retention time of the compound mass chromatographic peak in the sample, compared with the standard solution, is within the allowable deviation of ±2.5%; the signal-to-noise ratio of the reconstructed ion chromatographic peak of the qualitative ion pair of the compound under test is greater than or equal to 3 (S/N>=3); the signal-to-noise ratio of the reconstructed ion chromatographic peak of the quantitative ion pair is greater than or equal to 10 (S/N>=10); and the relative abundance of the qualitative ion pair, compared with the standard solution of the equivalent concentration, has a deviation not exceeding the requirements of Table 2; then it can judged that there is the corresponding target compound in the sample.

7.3.5 Quantitative determination

According to the external standard method, USE the standard working curve to perform quantitative determination.

7.3.6 Blank test

Except that no sample is added, all the operation procedures mentioned above are followed.

8 Calculation and expression of results

USE chromatographic data processor or formula (1) to calculate the penicillins residues in the sample. The calculation result needs to deduct the blank value: Relative ion abundance Allowable relative deviation […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 21315-2007

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 21315-2007

$125.00