GB/T 21150-2007stall regulation wind turbine generator system (English PDF)
失速型风力发电机组
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 21150-2007 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2007
Implementation date
January 1, 2008
Scope
GB/T 21150-2007 is the English-translated version of 失速型风力发电机组.
GB/T 21150-2007 is the Chinese standard "stall regulation wind turbine generator system". Its scope clause reads: This standard specifies the technical requirements to stall power control adjustment is characterized by a horizontal axis wind turbine, test methods, inspection regulations Then, packaging, storage, transportation and flag.
This standard applies to rotor swept area equal to or greater than the stall-type wind turbine 40m2 (hereinafter referred to as the unit). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 21150-2007
National Standard of the People's Republic of China
- ICS
- 27.180
- Classification
- F 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 2 Technical Requirements
- 6 Inspection rules
- 7 packaging, storage, transportation and marking
- Appendix A (informative) coupling assembly
1 Scope
This standard specifies the technical requirements to stall power control adjustment is characterized by a horizontal axis wind turbine, test methods, inspection regulations
Then, packaging, storage, transportation and flag.
This standard applies to rotor swept area equal to or greater than the stall-type wind turbine 40m2 (hereinafter referred to as the unit).
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2000, eqv ISO 780.1997)
GB/T 1413 Series 1 freight containers - Classification, dimensions and ratings
GB/T 2900.53 Electrotechnical terminology Wind turbine generator (GB/T 2900.53-2001, idt IEC 60050-415.1999)
GB/T 3785 sound level meter electric, acoustic performance and test methods
GB/T 6388 transport package shipping mark
GB/T 13924 involute cylindrical gears accuracy test specification
GB 16895.3 Electrical installations of buildings - Part 5-54. Selection and erection of electrical equipment - Earthing arrangements, protective conductors and Paul
Nursing bonding conductor (GB 16895.3-2004, IEC 60364-5-54.2002, IDT)
GB 18451.1 wind turbine safety requirements (GB 18451.1-2001, idt IEC 61400-1.1999)
GB/T 18451.2 wind turbine power performance test (GB/T 18451.2-2003, IEC 61400-12.1998, IDT)
GB/T 19069 wind turbine controller Technical conditions
GB/T 19071.1 asynchronous generator wind turbines - Part 1. Technical conditions
GB/T 19071.2 asynchronous generator wind turbines - Part 2. Test methods
GB/T 19072 wind turbine tower
GB/T 19073 wind turbine gearboxes
GB/T 20320 wind turbine power quality measurement and assessment methods (GB/T 20320-2006, IEC 61400-21.2001,
IDT)
JB/T 10194 wind turbine wind turbine blades
JB/T 10300 wind turbine design requirements
IEC 61400-11.2002 Wind turbines - Part 11 noise measurement method
IEC 61400-13.2001 Wind turbines - Part 13 Measurement of mechanical loads
3 Terms and Definitions
GB/T 2900.53, and established the following terms and definitions apply to this standard.
3.1 Isolated phenomenon airflow through airfoil occur
Stall caused by aerodynamic lift decline but increased resistance, limiting the wind turbine airfoil obtained from wind energy […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 21150-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 21150-2007
$255.00