GB/T 21128-2007Structural bamboo & wood composite board (English PDF)
结构用竹木复合板
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 21128-2007 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 16, 2007
Implementation date
May 1, 2008
Scope
GB/T 21128-2007 is the English-translated version of 结构用竹木复合板.
GB/T 21128-2007 is the Chinese standard "Structural bamboo & wood composite board". Its scope clause reads: This standard specifies the terms and definitions of structural bamboo composite panels, classification, technical requirements, test methods, inspection rules and markings, packages Equipment, signs, transportation, storage and so on.
This standard applies to bamboo, bamboo, wood veneer, sawn wood as a unit formed by the combination of plastic pressure, has good mechanical properties Can be used as a bearing plate. Its clauses include terms and definitions; categories; technical requirements.
Found what you need?
Document preview — GB/T 21128-2007
National Standard of the People's Republic of China
- ICS
- 79.060
- Classification
- B 70
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 categories
- 5 technical requirements
1 Scope
This standard specifies the terms and definitions of structural bamboo composite panels, classification, technical requirements, test methods, inspection rules and markings, packages
Equipment, signs, transportation, storage and so on.
This standard applies to bamboo, bamboo, wood veneer, sawn wood as a unit formed by the combination of plastic pressure, has good mechanical properties
Can be used as a bearing plate.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. All dated references, which are subsequently owned
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to reach an agreement based on this standard research
Whether you can use the latest versions of these files. For undated references, the latest version applies to this standard.
GB/T 2828.1-2003 Sampling procedures for sampling inspection - Part 1. batch acceptance inspection by acceptance quality limit (AQL) sampling
Plan (ISO 2859-1..1999, IDT)
Plywood - Part 2. Dimensional tolerances
GB/T 9846.4 plywood Part 4. Classification of ordinary plywood appearance technical conditions
Testing methods of physical and chemical properties of wood - based panels and veneer wood - based panels GB/T 17657-1999
GB/T 18259 Panels and decorative surface terminology
Interior decoration materials for interior use - Panels and their products formaldehyde emission limit
GB/T 19367.1 Determination of thickness, width and length of wood-based panels
GB/T 19367.2 Determination of the squareness and edge straightness of paneling
Code for acceptance of construction quality of timber structures
Standard test method for timber structure GB/T
3 Terms and definitions
GB/T 18259 established and the following terms and definitions apply to this standard.
3.1
Bamboo, bamboo, wood veneer, sawn wood as a unit formed by the combination of plastic pressure, has good mechanical properties, can be used for bearing
Piece of used board.
4 categories
Divided by durability.
--- Special structure with bamboo composite panels for outdoor use;
--- Class I structure with bamboo composite panels for indoor conditions.
5 technical requirements
5.1 size specifications
5.1.1
Size specifications should be consistent with the provisions of Table 1, the specification size tolerances shall comply with the provisions of Table 2, the special specifications by the supply and demand sides of the Association
Confirm.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 21128-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 21128-2007
$135.00