GB/T 21029-2007The series and type spectrum of geotechnical engineering instrument (English PDF)
岩土工程仪器系列型谱
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for GB/T 21029-2007 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 11, 2007
Implementation date
September 1, 2007
Scope
GB/T 21029-2007 is the English-translated version of 岩土工程仪器系列型谱.
GB/T 21029-2007 is the Chinese standard "The series and type spectrum of geotechnical engineering instrument". Its scope clause reads: This standard specifies the basic classification of geotechnical engineering instrumentation products, structure type, the delineation of the main parameters Series spectrum characteristics.
This standard gives geotechnical instrumentation product standards and product preparation planning guide prepared by the technical conditions.
This standard applies to all types of geotechnical engineering equipment research, design, manufacture and test the test does not apply to hydraulics, seismic and environmental monitoring capacity Measuring instruments. Its clauses include terms and definitions; products.
Found what you need?
Document preview — GB/T 21029-2007
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- P 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Product Category
- 4.1 soil test equipment
- 4.2 dam monitoring (observation) Instrument
- 4.3 Rock test (test) instrument
- 5 series model
- 5.1 soil test equipment
- 5.1.1 The laboratory test instrument
- 5.1.2 In situ test (test) instrument
- 5.2 dam monitoring (observation) instruments
- 5.2.1 Deformation monitoring (observation) instruments
- 5.2.2 stress/strain monitoring (observation) instruments
- 5.2.3 seepage monitoring (observation) instruments
- 5.2.4 Temperature monitoring (observation) instruments
- 5.2.5 dynamic monitoring (observation) instruments
- 5.2.6 When the meter
- 5.2.7 Other
- 5.3 Rock test (test) instrument
- 5.3.1 Preparation of the rock sample processing device
- 5.3.2 General test equipment
- 5.3.3 rock testing equipment
- 5.3.4 Rock testing equipment
- 5.3.5 situ monitoring instruments
- 5.3.6 mechanics model test instrument
- 5.3.7 quickly determine rock mass quality instrument
- 5.3.8 wave velocity test instrument
- 5.3.9 When the meter
- Appendix A (informative) Related Instruments Series spectrum
1 Scope
This standard specifies the basic classification of geotechnical engineering instrumentation products, structure type, the delineation of the main parameters Series spectrum characteristics.
This standard gives geotechnical instrumentation product standards and product preparation planning guide prepared by the technical conditions.
This standard applies to all types of geotechnical engineering equipment research, design, manufacture and test the test does not apply to hydraulics, seismic and environmental monitoring capacity
Measuring instruments.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 50279-1998 Standard for fundamental terms of geotechnical engineering
3 Terms and Definitions
Terms and definitions GB/T 50279-1998 established applicable to this standard.
4 Products
4.1 soil test equipment
Soil test equipment product categories are shown in Table 1.
Table 1 soil test equipment classification
Laboratory test instrument
Chemical analysis and mineral analysis instruments
Physical test equipment
Density Tester
Pycnometer
Cutting ring
Maximum densitometer
Minimum densitometer
Compactor
Large Compactor
Humidity tester
Soil Moisture Tachometer
Liquid limit device
Macrofunction tester
Wet digitizer
Dilatometer
Contractometer
Particle analyzer
Standard sieve
Hydrometer
Pipette analyzer […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 21029-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 21029-2007
$475.00