GB/T 2099.9-2017Plugs and socket-outlets for household and similar purposes—Part 2-9: Particular requirements for socket-outlets for information (English PDF)
家用和类似用途插头插座 第2-9部分：信息插座的特殊要求
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for GB/T 2099.9-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2017
Implementation date
April 1, 2018
Scope
GB/T 2099.9-2017 is the English-translated version of 家用和类似用途插头插座 第2-9部分：信息插座的特殊要求.
GB/T 2099.9-2017 is Part 2-9 of the Chinese national series on plugs and socket-outlets for household and similar purposes, with the particular requirements for information socket-outlets.
These are the fixed or mobile outlets, used indoors or outdoors, that connect equipment to the Internet and carry information; the part currently covers telephone, network and TV interface outlets, while others such as audio outlets are under consideration.
It deals with marking, protection against electric shock, construction, and electrical and mechanical performance, and includes chapters on EMC, transmission characteristics, environmental adaptability and reliability.
The outlets are intended for ambient temperatures normally not above 40 °C, with a 24-hour average not above 35 °C and a lower limit of -5 °C. It was issued on 29 September 2017 and has applied since 1 April 2018.
Found what you need?
Document preview — GB/T 2099.9-2017
National Standard of the People's Republic of China
- ICS
- 29.120.30
- Classification
- K 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General requirements
- 5 General description of the test
- 6 rating
- 7 Categories
- 8 logo
- 9 size check
- 10 terminal and terminal
- 11 fixed socket structure
- 13 anti-aging, provided by the protective shell and moisture
- 15 normal operation
- 16 force required to pull out the plug
- 17 flexible cable and its connection
- 19 heat
- 20 screws, current-carrying parts and their connections
- 21 Creepage distance, clearance and distance through sealant
- 22 Insulation resistance to abnormal heat, flame and tracking resistance
- 23 rust performance
- Appendix A (Normative) Test sample list required
- References
Foreword
GB/T 2099 "Household and similar plugs and sockets" is divided into the following sections.
--- Part 1. General requirements
--- Part 2. Special requirements
- Fuse plugs with special requirements
- appliance socket special requirements
- Converter special requirements
- Fixed non-interlocking switch socket with special requirements
- Fixed with interlock switch socket special requirements
- Extension cord socket special requirements
- Special Requirements for Safety Extra Low Voltage (SELV) Plug and Socket
- Information socket special requirements
This section GB/T 2099 Part 2-9.
This section drafted in accordance with GB/T 1.1-2009 given rules.
1 Scope
This section GB/T 2099 specifies the signs for household and similar use of information outlets, anti-shock protection, structure, electrical performance, machine Mechanical performance and other technical requirements.
This section applies to indoor or outdoor use, domestic and similar purposes, for connecting the Internet and the transmission of information fixed socket or Mobile sockets.
The information outlet is suitable for use in the following ambient temperatures, typically not exceeding 40 ° C but not exceeding 35 ° C over a period of 24 hours, The lower limit of ambient air temperature is -5 ° C.
Note: At present, this section of the information socket for telephone interface information outlet, network interface information outlet and TV interface information outlet, other information outlet (Eg, audio interface information outlet) is under consideration.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
Plugs and socket outlets for household and similar use - Part 1. General requirements
GB 4943.1 Information technology equipment safety Part 1: General requirements
GB/T 5095.2-1997 Electromechanical components for electronic equipment - Basic test procedures and measurement methods - Part 2: General inspection, electrical Continuity and contact resistance test, insulation test and voltage stress test
GB/T 5095.3-1997 Electromechanical components for electronic equipment Basic test procedures and measurement methods Part 3 Current carrying capacity test
GB/T 5095.5-1997 Electromechanical components for electronic equipment - Basic test procedures and measurement methods - Part 5 Impact test (from From pieces), static load test (fixed components), life test and overload test
GB/T 5095.7-1997 Electromechanical components for electronic equipment - Basic test procedures and measurement methods - Part 7: Mechanical operation test Inspection and sealing test
GB/T 5465.2 Graphical symbols for electrical equipment - Part 2: Graphical symbols
GB/T 11016 (all parts) Plastic insulated and rubber insulated telephone cords (all parts)
GB/T 11313.2-2007 RF connectors Part 2.9.52 RF coaxial connector sub-specification
GB/T 11318.1-1996 cable television and sound signal distribution system equipment and components - Part 1: General specification
GB/T 11318.12-1996 cable television and sound signal distribution system equipment and components - Part 12: System output through Use specifications
GB/T 15157.7 Printed board connectors with frequencies below 3 MHz - Part 7: Qualitative evaluation with universal mating characteristics 8-bit fixed and free connector detail specification
GB/T 16935.1 Insulation coordination of equipment in low-voltage systems - Part 1: Principles, requirements and tests
GB/T 17194-1997 Electrical conduit Electrical installation of the catheter outer diameter and catheter and accessories thread
GB/T 18015.3 digital communications for twisted pair or twisted multi-core symmetrical cables Part 3: Wiring cabling work area specification
GB/T 18290.3-2000 Solderless connections - Part 3: Contactable solderable insulation displacement connections - General requirements Test methods and Use guidelines
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 4943.1Audio/video,information and communication technology equipment—Part 1: Safety requirements
- GB/T 5095.2-1997Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
- GB/T 5095.3-1997Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests
- GB/T 5095.5-1997Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
- GB/T 5095.7-1997Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 7: Mechanical operating tests and sealing tests
- GB/T 5465.2Graphical symbols for use on equipment - Part 2: Graphical symbols
GB/T 11016
Similar standards
How to Download GB/T 2099.9-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4943.1-2022 — Audio/video,information and communication technology equipment—Part 1: Safety requirements
GB/T 11016.1-2009 — Plastic or rubber insulated telephone cords - Part 1: General
GB/T 11016.2-2009 — Plastic or rubber insulated telephone cords - Part 2: Polyvinyl chloride insulated telephone cords
Secure payment via Stripe
Payments accepted
GB/T 2099.9-2017
$415.00