GB/T 20254.1-2015Copper and copper alloy strips for lead frame—Part 1: Plane strip (English PDF)
引线框架用铜及铜合金带材 第1部分：平带
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 20254.1-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 11, 2015
Implementation date
April 1, 2016
Scope
GB/T 20254.1-2015 is the English-translated version of 引线框架用铜及铜合金带材 第1部分：平带.
GB/T 20254.1-2015 is the Chinese standard "Copper and copper alloy strips for lead frame—Part 1: Plane strip".
Its scope clause reads: This section GB/T 20254 specifies the requirements of the lead frame material with copper and copper alloy flat belts, test methods, inspection rules, marking, Packaging, transportation, storage, quality certificate and purchase order (or contract) content.
This section applies to the production of the electronics industry integrated circuits and discrete devices lead frame material with copper and copper alloy flat band (hereinafter referred to as band material). Its clauses include terms and definitions; requirements.
Found what you need?
Document preview — GB/T 20254.1-2015
National Standard of the People's Republic of China
- ICS
- 77.150.30
- Classification
- H 62
- Replacing
- GB/T 20254.1-2006
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements
1 Scope
This section GB/T 20254 specifies the requirements of the lead frame material with copper and copper alloy flat belts, test methods, inspection rules, marking,
Packaging, transportation, storage, quality certificate and purchase order (or contract) content.
This section applies to the production of the electronics industry integrated circuits and discrete devices lead frame material with copper and copper alloy flat band (hereinafter referred to as band material).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
RT Test Method. Test Part 1 GB/T 228.1-2010 metal material tensile
GB/T 351 metal material resistivity measurement method
GB/T 4340.1 metallic materials - Vickers hardness test - Part 1. Test methods
GB/T 5121 (all parts) of copper and copper alloys -
GB/T 5231 and processing of copper and copper alloy grades and chemical composition
GB/T 8888 heavy non-ferrous metal processing products, packaging, labeling, transportation, storage and quality certificate
GB/T 10610 Geometrical product specifications (GPS) Surface texture Profile method - Rules and procedures for evaluation of the surface structure
GB/T 26303.3 copper and copper alloy processing material Dimensions detection methods - Part 3. plate and strip
YS/T 478 copper and copper alloy conductivity eddy current testing method
YS/T 482 copper and copper alloy analysis photoemission spectroscopy
YS/T 668 copper and copper alloy physical and chemical detection sampling method
YS/T 815 methods for preparing copper and copper alloy mechanical and technological properties of the sample
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Resistance to softening
Metal or alloy resistant to high temperature softening. Usually after a certain time with the material is heated at a certain temperature, with room Wen Weishi hardness into
Line measure.
4 Requirements
4.1 Categories
4.1.1 grade, status, specifications
Strip grades, status, and shall conform to the specifications in Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 20254.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 20254.1-2015 | Copper and copper alloy strips for lead frame—Part 1: Plane strip | current edition | Current |
| GB/T 20254.1-2006 | Copper and copper alloy strips for lead frame—Part 1: Plane strip | previous edition | Superseded |
This page sells the current edition, GB/T 20254.1-2015. Earlier editions are listed for reference only.
How to Download GB/T 20254.1-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 20254.2-2015 — Copper and copper alloy strips for lead frame—Part 2: Profiled strip
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 20254.1-2015
$145.00