Valid

GB/T 20119-2023Steel wire ropes for balance (English PDF)

平衡用钢丝绳

Preview PDF

This is a limited preview

Buy now to download the full PDF (30 pages)

Need quotation for your management?

Get a formal quotation for GB/T 20119-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 7, 2023

Implementation date

April 1, 2024

Scope

GB/T 20119-2023 is the English-translated version of 平衡用钢丝绳.

GB/T 20119-2023 is the Chinese standard "Steel wire ropes for balance".

Its scope clause reads: This document specifies the classification, ordering information, materials, technical requirements, inspection and test methods, qualification criteria, acceptance, safety, use and maintenance, packaging, marking, and quality certificate of steel wire ropes for balance (hereinafter referred to as "steel wire ropes").

This document is applicable to round steel wire ropes and flat steel wire ropes for balance in coal, metal, non-metal and other mines. Its clauses include terms and definitions; classification.

Found what you need?

Document preview — GB/T 20119-2023

National Standard of the People's Republic of China

ICS
77.140.65
Classification
H 49
Replacing
GB/T 20119-2006

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification
  • 5 Order information
  • 6 Material
  • 7 Technical requirements
  • 8 Inspection and test methods
  • 9 Qualification criteria
  • 10 Acceptance
  • 11 Safety, use and maintenance
  • 12 Packaging, marking and quality certificate
  • Annex A (Normative) Mechanical property of steel wire ropes

1 Scope

This document specifies the classification, ordering information, materials, technical requirements, inspection and test methods, qualification criteria, acceptance, safety, use and maintenance, packaging, marking, and quality certificate of steel wire ropes for balance (hereinafter referred to as "steel wire ropes").

This document is applicable to round steel wire ropes and flat steel wire ropes for balance in coal, metal, non-metal and other mines.

2 Normative references

The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature

GB/T 238 Metallic materials - Wire - Reverse bend test

GB/T 239.1 Metallic materials - Wire - Part 1: Simple torsion test

GB/T 2104 Steel wire ropes - Packing, marking and certificate - General requirements

GB/T 8358 Steel wire ropes - Determination of measured breaking force

GB/T 8706 Steel wire ropes - Vocabulary, designation and classification

GB/T 21965 Steel wire ropes - Vocabulary for acceptance and defect

GB/T 29086 Steel wire ropes - Safety - Use and maintenance

NB/SH/T 0387 Wire rope greases

NB/SH/T 6019 Lubricating grease and maintenance oil for wire rope of friction hoist

YB/T 081 Rule for rounding off of numberical values and judgment of testing values for technical standards of metallurgy

YB/T 4452 Fibre cores for steel wire ropes

YB/T 5343 Steel wire for ropes

YB/T 5357 Steel wire and wire products - Zinc or zinc-aluminum alloy coating

3 Terms and definitions

For the purposes of this document, the terms and definitions given in GB/T 8706 apply.

4 Classification

4.1

The classification of steel wire ropes according to structure shall meet the requirements of GB/T 8706, as shown in Table 1. If the purchaser does not clearly specify the specific structure of the steel wire rope, the manufacturer may determine it on their own within the same group in Table 1.

4.2

The round steel wire ropes are classified into right interactive laying and left interactive laying according to the laying type and laying direction, as shown in Figures 1a) and 1b). The laying method of inner rope for multi-stand ropes in groups 4 to 9 in Table 1 shall be determined by the manufacturer.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.

Similar standards

Editions of GB/T 20119

EditionTitleRevisionStatus
GB/T 20119-2023Steel wire ropes for balancecurrent editionCurrent
GB/T 20119-2006Steel wire ropes for balanceprevious editionSuperseded

This page sells the current edition, GB/T 20119-2023. Earlier editions are listed for reference only.

How to Download GB/T 20119-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
30 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 20119-2023

$600.00