GB/T 19878-2005General specifications for capacitance type & resistance type grain moisture tester (English PDF)
电容法和电阻法粮食水分测定仪 通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 19878-2005 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 5, 2005
Implementation date
March 1, 2006
Scope
GB/T 19878-2005 is the English-translated version of 电容法和电阻法粮食水分测定仪 通用技术条件.
GB/T 19878-2005 is the Chinese national standard covering general specifications for capacitance type & resistance type grain moisture tester. It was issued on 5 September 2005 and has been in force since 1 March 2006, as a first edition.
The document is under the responsibility of the National Food and Strategic Reserves Administration. This page is published from the official record of the 2005 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 19878-2005
National Standard of the People's Republic of China
- ICS
- 17.040.30
- Classification
- N 50
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Pressure measurement
- 4 General
- 4.1 General requirements for the measurement of
- 4.2 Measurement System
- 4.3 3 sources
- 5 Electromagnetic compatibility test plan
- 5.2 Configuration of the equipment under test (EUT) during the test
- 5.3 EUT operating conditions during the test
- 5.4 Functional Characteristics Specification
- 5.5 Test description
- 5.6 Cut-off frequency
- 5.7 Time-averaged signal level
- 5.8 Filter Attenuation
- 5.9 Reference attenuation
- 6 Microphone Positions 4
- 6.1 Test conditions
- 6.2 Immunity test requirements
- 6.3 Accidental Aspects
- 6.4 Performance Criteria
- 6.5 Type Tests for Thermometers
- 6.6 Additional Type Tests for Special Applications of Thermometers
- 6.7 Summary of Tests
- 7 Installation and Operating Conditions of Machinery 5
- 7.1 For Resistors Only
- 7.2 For Resistors and/or Thermometers
- 7.3 Test
- 7.4 Baseplate Grouting
- 7.5 Concrete Structure Renovation and Grouting Reinforcement
- 7.6 Prestressed Duct Grouting
- 7.7 Winter and High-temperature Construction
- 7.8 Curing
- 8 Measurement 6
- 9 Test Report 9
1 Foreword
GB/T 19878-2005 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 5 September 2005 and has been in force since 1 March 2006.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
GB/T 19878-2005 falls under ICS 17.040.30, in the field of metrology and measurement.
This catalogue holds 1,153 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages
4 Related standards
Other editions:
GB/T 19878-2026 (later edition)
Standards on related subjects:
GB/T 37837-2019 — General rules for quadrupole inductively coupled plasma mass spectrometry
GB/T 30431-2013 — Gas chromatograph for laboratory
GB/T 29476-2012 — General technical specification for mobile laboratory instruments and equipments
GB/T 44374-2024 — Determination of performance of pressurized fluid extractor
5 Classification and status
International classification (ICS): 17.040.30
Chinese Standard Classification (CCS): N 50
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 46678-2025Grain and oil machinery - Testing equipment for paddy quality grading during procurement
- JY/T 0602-2017Equipment specifications for the major of grain and oil storage, transportation and detection technology in vocational schools
- JY/T 0603-2017Equipment specifications for the major of grain and oil storage and detection technology in vocational colleges
Similar standards
How to Download GB/T 19878-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 19878-2005
$150.00