Valid

GB/T 19557.19-2018Guidelines for the conduct of tests for distinctness, uniformity and stability—Chrysanthemum Chrysanthemum × morifolium Ramat. (Chrysanthemum × grandiflorum Ramat.) ,Chrysanthemum pacificum Nakai(Ajania pacifica Bremer and Humphries)and hybrids between them (English PDF)

植物品种特异性、一致性和稳定性测试指南 菊花

Preview PDF

This is a limited preview

Buy now to download the full PDF (34 pages)

Need quotation for your management?

Get a formal quotation for GB/T 19557.19-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 14, 2018

Implementation date

December 1, 2018

Scope

GB/T 19557.19-2018 is the English-translated version of 植物品种特异性、一致性和稳定性测试指南 菊花.

GB/T 19557.19-2018 is the Chinese guideline for testing distinctness, uniformity and stability (DUS) of chrysanthemum varieties, covering Chrysanthemum x morifolium, Chrysanthemum pacificum and hybrids between them.

It sets the propagation material to be submitted, at least 50 healthy, untreated seedlings, and the test method: test cycle, location, field trial design with plots of at least 25 plants in two replicates, field management, and the observation periods, methods and sample numbers for each trait.

It explains how distinctness, uniformity and stability are judged, with a 1% population standard and an acceptance probability of at least 95%. Annex A gives the table of basic and optional traits with expression states, codes and example varieties, and the grouping traits include plant type, flower head type and ray floret colours. It was issued on 14 May 2018 and has applied since 1 December 2018.

Found what you need?

Document preview — GB/T 19557.19-2018

National Standard of the People's Republic of China

ICS
65.020.20
Classification
B 05

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 symbol
  • 5 Conditions to be met for reproductive material
  • 6 Test Method
  • 6.1 Test cycle
  • 6.2 Test location
  • 6.3 Field trial
  • 6.4 trait observation
  • 6.5 Additional Test
  • 7 Determination of specificity, consistency and stability results
  • 8 traits table
  • 9 grouping traits
  • 10 Technical Questionnaire
  • Appendix A (normative appendix) Chrysanthemum traits table
  • Appendix B (normative appendix) Explanation of the chrysanthemum trait table
  • Appendix C (Normative Appendix) Chrysanthemum Technical Questionnaire

Foreword

GB/T 19557 "Guidelines for Testing Plant Variety Specificity, Consistency and Stability" is divided into the following sections.

---GB/T 19557.1 General Guidelines for the Testing of Plant Variety Specificity, Consistency and Stability;

---GB/T 19557.2 Plant Variety Specificity, Consistency and Stability Test Guide for Common Wheat;

---GB/T 19557.3 Test Guide for Specific Variety, Consistency and Stability of New Varieties of Plants;

---GB/T 19557.4 Plant Variety Specificity, Consistency and Stability Test Guide Soy;

---GB/T 19557.5 Plant Variety Specificity, Consistency and Stability Test Guide Chinese Cabbage;

---GB/T 19557.6 Test Guide for Plant Variety Specificity, Consistency and Stability ramie;

---GB/T 19557.7 Test Guide for Plant Variety Specificity, Consistency and Stability;

---GB/T 19557.8 New plant variety specificity, consistency and stability test guide Li;

---GB/T 19557.9 Plant Variety Specificity, Consistency and Stability Test Guide Mustard;

---GB/T 19557.10 Plant Variety Specificity, Consistency and Stability Test Guide Lily;

---GB/T 19557.11 Plant Variety Specificity, Consistency and Stability Test Guide Kiwifruit;

---GB/T 19557.12 Plant Variety Specificity, Consistency and Stability Test Guide Garlic;

---GB/T 19557.13 Test Guide for Plant Variety Specificity, Consistency and Stability;

---GB/T 19557.14 Test Guide for Plant Variety Specificity, Consistency and Stability Brassica napus L.;

---GB/T 19557.15 Guidelines for the testing of plant species specificity, consistency and stability;

---GB/T 19557.16 Test Guide for Plant Variety Specificity, Consistency and Stability;

---GB/T 19557.17 Plant Variety Specificity, Consistency and Stability Test Guide Pepper;

---GB/T 19557.18 Test Guide for Plant Variety Specificity, Consistency and Stability;

---GB/T 19557.19 Plant Variety Specificity, Consistency and Stability Test Guide Chrysanthemum;

---GB/T 19557.20 Test Guide for Plant Variety Specificity, Consistency and Stability Eggplant;

---GB/T 19557.21 Plant Variety Specificity, Consistency and Stability Test Guide Melon;

---GB/T 19557.22 Plant Variety Specificity, Consistency and Stability Test Guide peas;

---GB/T 19557.23 Plant Variety Specificity, Consistency and Stability Test Guide Carnation;

---GB/T 19557.24 Test Guide for Plant Variety Specificity, Consistency and Stability;

---GB/T 19557.25 Plant Variety Specificity, Consistency and Stability Test Guide Cucumber;

---GB/T 19557.26 Plant Variety Specificity, Consistency and Stability Test Guide Apple;

---GB/T 19557.27 Plant Variety Specificity, Consistency and Stability Test Guide Watermelon;

---GB/T 19557.28 Test Guide for Plant Variety Specificity, Consistency and Stability;

---GB/T 19557.29 Plant Variety Specificity, Consistency and Stability Test Guide Cabbage;

---GB/T 19557.30 Plant Variety Specificity, Consistency and Stability Test Guide Pear;

---GB/T 19557.31 Plant Variety Specificity, Consistency and Stability Test Guide Barley;

---GB/T 19557.32 Plant Variety Specificity, Consistency and Stability Test Guide Sweet Potato;

---GB/T 19557.33 Plant Variety Specificity, Consistency and Stability Test Guide Cauliflower.

This part is the 19th part of GB/T 19557.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This part of GB/T 19557 gives chrysanthemum [Chrysanthemum × morifolium Ramat. (Chrysanthemum × Grandiflorum Ramat.), Chrysanthemum pacificum Nakai (Ajania pacifica Bremer and Humphries) and hybrids between them] The technical points of the breed specificity, consistency and stability test and the general principles of outcome determination.

This section applies to chrysanthemum varieties and their hybrids specificity, consistency and stability testing and results determination.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 19557.1 General guidelines for testing specificity, consistency and stability of plants

3 Terms and definitions

The following terms and definitions as defined in GB/T 19557.1 apply to this document.

3.1 Group measurement

An organ or part of a batch of plants or plants is measured to obtain a group record.

3.2 Individual measurement

An individual organ or part of a plant or plant is measured one by one, and a set of individual records is obtained.

3.3 Group visual observation

Visual inspection of an organ or part of a plant or plant to obtain a population record.

3.4 Individual visual inspection

An individual organ or part of a plant or plant is visually inspected one by one to obtain a set of individual records.

4 Symbol

The following symbols apply to this document.

MG. Group measurement.

MS. Individual measurement.

PQ. False quality traits.

QL. Quality traits.

QN. Quantitative traits.

VG. Group visual inspection.

VS. Individual visual inspection.

*. The labeling trait is the importance of the International Union for the Protection of New Varieties of Plants (UPOV) for the harmonization of species descriptions, unless The state of expression of the conditional restriction was not tested and was required for all UPOV members.

. Underlined is a special indication of the scope of test traits.

5 Conditions to be met for reproductive material

5.1 Propagation material is provided in the form of seedlings.

5.2 The number of seedlings submitted is at least 50.

5.3 Submitting seedlings requires good appearance, high vitality and no pests and diseases. The quality of seedlings should be met. ground diameter >=0.3cm, seedling height >=8cm, leaves The number is >=4 pieces.

5.4 The submitted seedlings generally do not undergo any treatment that affects the expression of the traits. If processed, a detailed description of the processing is required.

5.5 The submitted reproductive materials shall comply with the relevant provisions of the Chinese phytosanitary regulations.

6 Test methods

6.1 Test cycle

The test cycle is at least one growth cycle.

6.2 Test location

Testing is usually done at one location. If certain traits are not adequately expressed at the site, they may be carry out testing.

6.3 Field trial

6.3.1 Test design

The varieties to be tested and the approximate varieties are planted adjacently.

The seedlings are planted in a cave, and there are no less than 25 plants in each plot, with 2 replicates. The row spacing of the planted plants depends on the type of variety.

6.3.2 Field management

It can be carried out according to the local Daejeon production management method. The field management of each community needs to be strictly consistent, and the same management measures need to be completed on the same day.

6.4 Trait observation

6.4.1 Observation period

Trait observations are carried out in accordance with the growth stages listed in Tables A.1 and A.2. The birth stage is described in Table B.1.

6.4.2 Methods of observation

The observation of traits shall be carried out in accordance with the observation methods (VG, VS, MG, MS) specified in Table A.1 and Table A.2. See some trait observation methods B.2 and B.3.

6.4.3 Number of observations

Unless otherwise stated, the number of individual observed traits (VS, MS) samples is not less than 10, when observing the organs or parts of the plants, The number of samples per plant is one. Group observation traits (VG, MG) need to observe the entire cell or a mixed sample of the specified size.

6.5 Additional testing

If necessary, additional tests may be performed using the traits in Table A.2 or the traits not listed in this section.

7 Determination of specificity, consistency and stability results

7.1 General principles

The determination of specificity, consistency and stability is carried out in accordance with the principles established in GB/T 19557.1.

7.2 Specificity determination

The variety to be tested needs to be clearly distinguished from all known varieties. In the test, when the species to be tested is at least one trait and the most similar variety When there is a significant and reproducible difference, it can be determined that the tested variety has specificity.

7.3 Determination of consistency

For consistency determination, a 1% population criterion and a probability of acceptance of at least 95% were used. When the sample size is 40, the maximum can be allowed. There are 2 strains of different types.

7.4 Determination of stability

If a variety is consistent, the variety can be considered stable. Stability is generally not tested.

If necessary, the next batch of seedlings of the variety can be planted, and if there is no significant change in the expression of the trait compared with the previously provided seedlings, it can be determined This variety has stability.

8 Trait table

8.1 Overview

According to the test needs, the traits are divided into basic traits and selected traits. The basic trait is the trait to be observed in the test.

Additional testing traits as requested by the applicant. The basic traits of chrysanthemum are shown in Table A.1, and the traits of chrysanthemum can be selected for testing. See Table A.2.

The trait table lists the trait name, expression type, expression status and corresponding codes and standard varieties, observation periods and methods.

8.2 Expression type

According to the expression pattern of traits, the traits are divided into three types. quality traits, false quality traits and quantitative traits.

8.3 Expression status and corresponding code

Each trait is divided into a series of expression states to facilitate the definition of traits and specification descriptions; each expression state is assigned a corresponding number Code to facilitate the creation and communication of data records, processing and variety descriptions.

8.4 Standard varieties

The traits table lists some of the standard traits that can be referred to in terms of expression status to help determine the different expression status of related traits. And correct for differences caused by environmental factors.

9 Grouping traits

The grouping traits are as follows.

a) *plant. type (character 2 in Table A.1);

b) * Flower head. type (character 24 in Table A.1);

c) * Except for double-flowered varieties. fancy. type (character 25 in Table A.1);

d) * Tongue florets. number of inner colours (character 48 in Table A.1);

e) * Tongue florets. inner main color (character 49 in Table A.1). Group by color. Group 1. white or near white;

2 groups. yellow green;

3 groups. green;

4 groups. light yellow;

5 groups. yellow;

6 groups. orange;

7 groups. pink;

8 groups. red;

9 groups. light purple;

10 groups. purple;

f) * Tongue florets. inner secondary color (characteristic 50 in Table A.1). Group by color. Group 1. white or near white;

2 groups. yellow green;

3 groups. green;

4 groups. light yellow;

5 groups. yellow;

6 groups. orange;

7 groups. pink;

8 groups. red;

9 groups. light purple;

10 groups. purple.

10 Technical Questionnaire

Applicants should fill in the Chrysanthemum Technical Questionnaire according to Appendix C.

Appendix A (normative appendix) Chrysanthemum trait table

A.1 Basic characteristics of chrysanthemum

The basic traits of chrysanthemum are shown in Table A.1. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 34 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 19557.19-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
34 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 19557.19-2018

$510.00