GB/T 18889-2026Test methods for accessories for power cables with rated voltages from 6 kV (Um =7.2 kV) up to 35 kV (Um =40.5 kV) (English PDF)
额定电压6 kV(Um =7.2 kV)至35 kV (Um =40.5 kV)电力电缆附件试验方法
Also coversGB/T18889-2026 + GBT18889-2026
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 18889-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 28, 2026
Implementation date
April 1, 2027
Scope
GB/T 18889-2026 is the English-translated version of 额定电压6 kV(Um =7.2 kV)至35 kV (Um =40.5 kV)电力电缆附件试验方法.
Accessories for power cables, such as joints and terminations, are critical points in medium-voltage networks, and this recommended national standard sets out the test methods applied to accessories for cables rated from 6 kV up to 35 kV. It is used by accessory manufacturers, independent and in-house high-voltage laboratories, cable system designers, utilities and grid companies that must verify that accessories perform as intended before they are installed.
The document is the test-method companion that laboratories refer to when running type, sample or routine verification of such accessories, and it is useful to export suppliers who need to understand how Chinese practice approaches the testing of cable accessories in this voltage range. It replaces GB/T 18889-2002 and adopts an international standard. It was prepared under the China Electrical Equipment Industry Association and becomes effective on 1 April 2027.
Found what you need?
Document preview — GB/T 18889-2026
National Standard of the People's Republic of China
- ICS
- 29.060.20
- Classification
- K13
- Replacing
- GB/T 18889-2002
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
GB/T 18889-2026 is a recommended national standard (GB/T) of the People's Republic of China, issued on 28 September 2026 by the State Administration for Market Regulation and the Standardization Administration of China, with effect from 1 April 2027.
This edition replaces GB/T 18889-2002.
The document adopts an international standard (ISO or IEC).
It is under the responsibility of the China Electrical Equipment Industry Association.
Classification: ICS 29.060.20; CCS K13.
1 Scope
Accessories for power cables, such as joints and terminations, are critical points in medium-voltage networks, and this recommended national standard sets out the test methods applied to accessories for cables rated from 6 kV up to 35 kV. It is used by accessory manufacturers, independent and in-house high-voltage laboratories, cable system designers, utilities and grid companies that must verify that accessories perform as intended before they are installed.
The document is the test-method companion that laboratories refer to when running type, sample or routine verification of such accessories, and it is useful to export suppliers who need to understand how Chinese practice approaches the testing of cable accessories in this voltage range. It replaces GB/T 18889-2002 and adopts an international standard. It was prepared under the China Electrical Equipment Industry Association and becomes effective on 1 April 2027.
Remaining clauses in the full document
- 2 Normative references
- 3 Terms and definitions
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- JB/T 12429-2015Class 1E heat-shrinkable power cable splices for nuclear power plants
- NB/T 42050-2015Optical fiber composite medium-voltage cable
- NB/T 20284-2014Technical specification for safety class cable heat-shrinkable accessories in nuclear power plants
- JB/T 7829-2006Heat-shrinkable terminations for power cables with rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV)
Editions of GB/T 18889
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 18889-2026 | Test methods for accessories for power cables with rated voltages from 6 kV (Um =7.2 kV) up to 35 kV (Um =40.5 kV) | current edition | Current |
| GB/T 18889-2002 | Electric cables-test methods for accessories for power cables with rated voltage from 6kV (Um=7.2kV) up to 35kV (Um=40.5kV) | previous edition | In force until 1 April 2027 |
This page sells the current edition, GB/T 18889-2026. Earlier editions are listed for reference only.
How to Download GB/T 18889-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 18889-2026
$1,927.00