GB/T 18607-2017Petroleum and natural gas industries—Drilling and production equipment—Reciprocating full liner pump (English PDF)
石油天然气工业 钻井和采油设备 往复式整筒抽油泵
This is a limited preview
Buy now to download the full PDF (111 pages)
Need quotation for your management?
Get a formal quotation for GB/T 18607-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 18607-2017 is the English-translated version of 石油天然气工业 钻井和采油设备 往复式整筒抽油泵.
GB/T 18607-2017 is the Chinese standard "Petroleum and natural gas industries—Drilling and production equipment—Reciprocating full liner pump". Its scope clause reads: This standard specifies a reciprocating full barrel pump used in the rod pumping system used in the oil and gas industry (hereinafter referred to as the pump).
Design requirements and test methods. This standard applies to the general pump diameter pump assembly (including rod pump and tube pump), parts and components of rod pumping system. for Ensuring that all parts are standardized and interchangeable provides sufficient size requirements.
Note. This standard has detailed provisions for many parts and components, so no design package is required. However, some parts require design packages that are organized in tables B.9~Table B.17, B.21, B.22, B.27, B.29, B.31, B.32, B.36, B.37, B.38, B.39, B .40, B.43, B.48, B.52, B.53, B.54, B.58.
This standard does not apply to the design of a special pump, nor does it include the installation, operation and maintenance of a pump. About installation, operation and maintenance See SY/T 5188 for details. Its clauses include terms, definitions, symbols and abbreviations.
Found what you need?
Document preview — GB/T 18607-2017
National Standard of the People's Republic of China
- ICS
- 75.180.10
- Classification
- E 92
- Replacing
- GB/T 18607-2008
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms, definitions, symbols, and abbreviations
- 4 Functional requirements
- 5 Technical Requirements
- 6 Manufacturer Requirements
- Appendix A (Normative) Suction pump assembly
- Appendix B (Normative Appendix) Suction Pump Parts
- Appendix C (normative) Measurement, test and inspection
- Appendix D (Normative) Mark
- Appendix E (Normative Appendix) Material
- Appendix F (Normative) Threaded connections
- Appendix G (Informative Appendix) Rod pumping system Figure
- Appendix H (Informative) The clearance gap between the metal plunger and the pump cylinder
- Appendix I (informative) Pump assembly sealing performance test pressure recommendation
- Appendix J (informative annex) Maximum clearance loss recommendation value of
- Appendix K (Informative) Metric Common Thread Size 110 for Suction Pumps and Parts Thereof
- Appendix L (informative) This standard and APISpec11AX.2015 (13th edition) technical differences and their causes
1 Scope
This standard specifies a reciprocating full barrel pump used in the rod pumping system used in the oil and gas industry (hereinafter referred to as the pump).
Design requirements and test methods.
This standard applies to the general pump diameter pump assembly (including rod pump and tube pump), parts and components of rod pumping system. for
Ensuring that all parts are standardized and interchangeable provides sufficient size requirements.
Note. This standard has detailed provisions for many parts and components, so no design package is required. However, some parts require design packages that are organized in tables
B.9~Table B.17, B.21, B.22, B.27, B.29, B.31, B.32, B.36, B.37, B.38, B.39, B .40, B.43, B.48, B.52, B.53, B.54,
B.58.
This standard does not apply to the design of a special pump, nor does it include the installation, operation and maintenance of a pump. About installation, operation and maintenance
See SY/T 5188 for details.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 197 Common thread tolerances (GB/T 197-2003, ISO 965-1.1998, MOD)
GB/T 228.1 Tensile test of metallic materials - Part 1. Test method for room temperature (GB/T 228.1-2010, ISO 6892-1.
2009, MOD)
GB/T 230.1 Rockwell hardness test for metallic materials - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T
Ruler (GB/T 230.1-2009, ISO 6508-1.2005, MOD)
GB/T 1804 Tolerance tolerance for linear and angular dimensions of general tolerances (GB/T 1804-2000, ISO 2786-1.
1989, EQV)
GB/T 2828.1 Count Sampling Inspection Procedures Part 1. Batch Inspection Sampling Plans Retrieved by Acceptance Quality Limit (AQL) (GB/T 2828.1-2012, ISO 2859-1.1999, IDT)
GB/T 4340.1 Vickers hardness test of metallic materials - Part 1. Test method (GB/T 4340.1-2009, ISO 6507-
1.2005,MOD)
GB/T 9253.2 Petroleum, natural gas industrial casing, tubing and line pipe thread processing, measurement and inspection
GB/T 9445 Qualification and certification of nondestructive testing personnel (GB/T 9445-2015, ISO 9712.2012)
GB/T 18449.1 Knoop hardness test of metallic materials - Part 1. Test method (GB/T 18449.1-2009,
ISO 4545-1.2005, MOD)
SY/T 5029 Sucker Rod
Recommended Practice for Maintenance and Use of SY/T 5188 Suction Pumps
3 Terms, definitions, symbols and abbreviations
3.1 Terms and Definitions
The following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 111 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 197General purpose metric screw threads -- Tolerances
- GB/T 228.1Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature
- GB/T 230.1Metallic materials - Rockwell hardness test - Part 1: Test method
- GB/T 1804General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 4340.1Metallic materials - Vickers hardness test - Part 1: Test method
Similar standards
Editions of GB/T 18607
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 18607-2017 | Petroleum and natural gas industries—Drilling and production equipment—Reciprocating full liner pump | current edition | Current |
| GB/T 18607-2008 | Petroleum and natural gas industries—Drilling and production equipment—Reciprocating full liner pump | previous edition | Superseded |
This page sells the current edition, GB/T 18607-2017. Earlier editions are listed for reference only.
How to Download GB/T 18607-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 18449.1-2001 — Metallic Knoop hardness test - Part 1: Test method
GB/T 18449.1-2009 — Metallic materials - Knoop hardness test - Part 1: Test method
Secure payment via Stripe
Payments accepted
GB/T 18607-2017
$1,475.00