GB/T 17759-2018Inspection method for grey fabric surface defects (English PDF)
本色布布面疵点检验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 17759-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 28, 2018
Implementation date
July 1, 2019
Scope
GB/T 17759-2018 is the English-translated version of 本色布布面疵点检验方法.
GB/T 17759-2018 is the Chinese national standard covering inspection method for grey fabric surface defects. It was issued on 28 December 2018 and has been in force since 1 July 2019, replacing GB/T 17759-2009.
The document is under the responsibility of the China National Textile and Apparel Council. This page is published from the official record of the 2018 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 17759-2018
National Standard of the People's Republic of China
- ICS
- 59.080.01
- Classification
- W 10
- Replacing
- GB/T 17759-2009
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Principle
- 4.1 Specimen mass and thickness
- 4.2 Laboratory samples
- 4.3 Test samples
- 5 Test specimen
- 5.1 Hydrocarbon solvents
- 5.2 Detergent
- 5.3 Test steps
- 5.4 Result calculation and presentation
- 5.5 Test report
- 6 Procedure
- 6.2 Instruments and equipment
- 7.1 Pre-humidification and test standard atmosphere
- 8 Test procedure
- 8.2 Test conditions
- 9 Test results
1 Foreword
GB/T 17759-2018 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 28 December 2018 and has been in force since 1 July 2019.
It replaces the earlier edition GB/T 17759-2009, GB/T 17759-1999.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 17759-2018 falls under ICS 59.080.01, in the field of textile and leather technology.
This catalogue holds 1,332 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages
4 Related standards
Other editions:
GB/T 17759-2026 (later edition)
GB/T 17759-2009 (earlier edition)
GB/T 17759-1999 (earlier edition)
Standards on related subjects:
GB/T 6097-2023 — Sampling method for testing of cotton fibers
GB/T 21977-2022 — Camel hair
FZ/T 01085-2018 — Testing method for peeling strength of fusible interlinings
GB/T 31902-2025 — Inspection method for appearance defects on garment interlining
GB/T 46728-2025 — Inspection method for nep and trash on grey fabric
5 Classification and status
International classification (ICS): 59.080.01
Chinese Standard Classification (CCS): W 10
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 5325-2024Cotton and polyester blended grey fabric
- FZ/T 13025-2021Cotton and viscose blended grey fabric
- FZ/T 13051-2021Cotton/wool blended and covered polyester drawn textured yarn grey fabric
- FZ/T 13052-2021Cotton and lyocell blended grey fabric
- FZ/T 13053-2021Cotton and viscose yarn interwoven grey fabric
- FZ/T 13024-2020Meta-aramidgrey fabric
Similar standards
Editions of GB/T 17759
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 17759-2018 | Inspection method for grey fabric surface defects | current edition | Current |
| GB/T 17759-2009 | Inspection method for grey fabric surface defects | previous edition | Superseded |
This page sells the current edition, GB/T 17759-2018. Earlier editions are listed for reference only.
How to Download GB/T 17759-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 17759-2018
$321.00