GB/T 17714-2022Quality general rules of beer keg (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.

This document replaces GB/T 17714-1999 "Beer Barrel". Compared with GB/T 17714-1999, except for structural adjustment and editorial changes in addition, the main technical changes are as follows:

a) The scope of application has been changed, adding tin (chrome) thin steel beer kegs (see Chapter 1, Chapter 1 of the 1999 edition);

b) Added terms and definitions (see Chapter 3);

c) Product classification has been changed (see Chapter 4, Chapter 3 of the 1999 edition);

d) Changed the material requirements (see Chapter 5, 4.1 of the 1999 edition);

e) Increased size (see 6.1);

f) Increased appearance quality (see 6.2);

g) Changed the performance requirements (see 6.3, 4.4 of the 1999 edition);

h) The test method has been changed (see Chapter 7, Chapter 5 of the 1999 edition);

i) The inspection rules have been changed (see Chapter 8, Chapter 6 of the 1999 edition);

j) The requirements for marking, packaging, transportation and storage have been changed (see Chapter 9, Chapter 7 of the 1999 edition).

1 Scope

This document specifies the product classification, raw materials, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage of beer kegs.

This document is applicable to stainless steel beer kegs made of stainless steel raw materials with a capacity of more than 5L and tin (chrome) steel sheets as the barrel body material, made of tin (chromium) thin steel plate or aluminum alloy thin plate as the lid material, with a volume of 1L~10L tin (chromium) steel plate beer, design, production and inspection of wine barrels.

Note: Beer kegs are mainly used for filling beer, but also for filling other beverages.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references for documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 191 Packaging, storage and transportation icon marks

GB/T 2520 Cold-rolled tin-plated steel sheets and strips

GB/T 2828.1 Counting sampling inspection procedure Part 1: Batch-by-batch inspection sampling plan retrieved by acceptance quality limit (AQL)

GB/T 3280 stainless steel cold-rolled steel plate and strip

GB/T 3880.1 Aluminum and aluminum alloy plates and strips for general industrial use - Part 1: General requirements

GB/T 3880.2 Aluminum and aluminum alloy plates and strips for general industrial use - Part 2: Mechanical properties

GB/T 3880.3 Aluminum and aluminum alloy plates and strips for general industrial use - Part 3: Dimensional deviations

GB/T 10125 Artificial Atmosphere Corrosion Test Salt Spray Test

GB/T 14251-2017 General technical requirements for metal containers of canned food

GB/T 17590-2008 Aluminum easy-open lid three-piece cans

GB/T 24180 Cold-rolled electrochrome-plated steel sheets and strips

GB/T 29603-2013 Tin-plated or chrome-plated steel sheet full open easy-open end

QB/T 1877 Packaging and Decoration Tin (Chrome) Sheet Steel Printing Matters

QB/T 2763 coated tin (or chromium) thin steel sheet

YS/T 726 Aluminum alloy plate and strip for can lid material and pull ring material

3 Terms and Definitions

The following terms and definitions apply to this document.