GB/T 15098-2008The principle of classification of transport packaging groups of dangerous goods (English PDF)

1 Scope

This standard specifies the division of all kinds of transport of dangerous goods packaging method categories.

This standard applies to dangerous goods production, storage, transport and inspection department of the transport of dangerous goods packaging performance test and inspection when indeed

Set packing group basis.

This standard does not apply to.

a) transport packaging containing explosives;

b) the pressure vessel containing the gas;

c) containing organic peroxides and self-reactive substances of transport packaging;

d) containing infectious substances transport packaging;

e) containing radioactive material transport packages;

f) containing miscellaneous dangerous substances and articles of transport packaging;

g) the net mass greater than 400kg of packaging;

h) volume greater than 450L packaging.

There are special requirements on the other handled according to relevant regulations.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 261-1983 Petroleum products - Determination of flash point (closed cup)

GB/T 616-2006 General method for determination of chemical reagents boiling point

GB 6944 Classification and code of dangerous goods

GB/T 7634-1987 Petroleum and related products of low flash point - Rapid equilibrium method

GB 12268 of dangerous goods

GB/T 21615-2008 dangerous flammable liquids Closed Cup Test Method

GB/T 21775-2008 Determination of flash point - Closed cup equilibrium method

GB/T 21789-2008 Petroleum products and other liquids - Determination of flash point Abel closed cup method

United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations" (15th edition)

3 Packing group

Packaging of dangerous goods according to the degree of risk of its contents into three packing groups.

Class I Packing. holding goods have greater risk;

Class II Packaging. goods with medium containing dangerous;

III Packing. holding goods with a smaller risk.

Division 4 packing groups