GB/T 14283-2008General specifications of spot-welding robots (English PDF)

Foreword

This standard is GB/T 14283-1993 "spot welding robot general technical conditions" revision.

This standard replaces GB/T 14283-1993 "General technical requirements for spot welding robots." This standard compared with GB/T 14283-1993 main changes are as follows.

a) Many of the standards cited in GB/T 14283-1993 have been obsoleted, and the current revision adopts the latest standard. The main reference documents Change as follows. In "Normative references" to.

--- To JB/T 8896-1999 instead of ZBJ28001 industrial robots acceptance rules;

--- GB/T 5226.1-2002 instead of ZBJ50002, GB 4943, GB 6833.2, GB 6833.5;

--- To GB /Z19397-2003/ISO /T R11062..1994 instead of GB 6833;

--- To GB/T 12642-2001 instead of GB/T 12642, GB/T 12645 and JB/Z285-1987;

--- Test Method The title of the article according to GB /Z19397-2003/ISO /T R11062..1994, GB/T 5226.1-2002, GB/T 12642-2001 be amended accordingly. And use the corresponding new chapter. The following normative references have been added.

--- JB/T 8896-1999 "Acceptance rules of industrial robots."

b) "5.3 Functions" "5.5 Noise" "5.10 Electromagnetic Compatibility" The chapter "5.13 Reliability" has been improved.

1 Scope

This standard specifies the technical requirements of spot welding robot, test methods and inspection rules.

This standard applies to a variety of spot welding robot.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. All dated references, which are subsequently owned Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to reach an agreement based on this standard research Whether you can use the latest versions of these files. For undated references, the latest version applies to this standard.

GB/T 191-2008 Packaging - Pictorial signs (ISO 780:1997, MOD)

GB/T 3766-2001 General technical requirements for hydraulic systems (eqv ISO 4413:1998)

GB/T 4768-1995 Mold packaging requirements (neq IEC 68. 1988)

Rustproof packaging GB/T 4879-1999

Waterproof packaging GB/T 5048-1999

GB 11291-1997 Industrial Robots Safety Code (eqv ISO 10218:1992)

GB/T 5226.1-2002 Safety of Machinery - Industrial Machinery Electrical Equipment Part 1, General Requirements (idt IEC 60204-1. 2000)

GB/Z 19397-2003 Industrial robots - Electromagnetic compatibility test methods and guidelines for performance evaluation guidelines (ISO/TR 11062. 1994, IDT)

GB/T 12642-2001 Performance specifications and test methods of industrial robots (eqv ISO 9283:1998)

Safety of industrial robots - Code of practice GB/T 20867-2007

Acceptance rules for industrial robots

3 Product categories

3.1 by coordinate type is divided into.

a) rectangular coordinates spot welding robot;

b) cylindrical coordinates spot welding robot;

c) spherical coordinate type spot welding robot;

d) Joint spot welding robot.

3.2 by the drive is divided into.

a) Hydraulic spot welding robot;

b) pneumatic spot welding robot;

c) electric spot welding robot.

3.3 according to the way the site is divided into.

a) Vertical floor-mounted spot welding robot;

b) tilt-mounted spot welding robot;

c) hanging spot welding robot.

4 Performance

4.1 Spot welding robot (hereinafter referred to as robot) performance indicators should be specified in product standards, should include the following.