GB/T 13853-2009General specification for hydraulic pumps and motors of ship (English PDF)
船用液压泵液压马达技术条件
This is a limited preview
Buy now to download the full PDF (14 pages)
Need quotation for your management?
Get a formal quotation for GB/T 13853-2009 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Level / Type
National · Recommended
Issue date
March 9, 2009
Implementation date
November 1, 2009
Scope
GB/T 13853-2009 is the English-translated version of 船用液压泵液压马达技术条件.
GB/T 13853-2009 is the Chinese standard "General specification for hydraulic pumps and motors of ship".
Its scope clause reads: This standard specifies the marine hydraulic pump, hydraulic motor (hereinafter referred to as the pump motor when the pump motor as a pump, referred to as the pump; when the pump motor as a When the motor, referred to the content of the motor, the same below) requirements, inspection rules.
Use temperature, viscosity, cleanliness and other parameters meet the specified operating medium by the pump motor rated speed and nominal co-determination Pump motor conditions.
Found what you need?
Document preview — GB/T 13853-2009
National Standard of the People's Republic of China
- ICS
- 47.020.30
- Classification
- U 57
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China
Contents
- Foreword
- 1 Scope
Foreword
This standard replaces GB/T 13853-1992 "hydraulic pumps and motors for marine conditions." This standard compared with GB/T 13853-1992, mainly in the following changes.
--- Increasing the structural vibration acceleration and noise limits electric air pump unit;
--- Increasing the interface requirements of the pump motor;
--- Increase the maintainability index hydraulic pump motor.
Appendix A of this standard is a normative appendix.
The standard proposed by China Shipbuilding Industry Corporation.
1 Scope
This standard specifies the marine hydraulic pump, hydraulic motor (hereinafter referred to as the pump motor when the pump motor as a pump, referred to as the pump; when the pump motor as a When the motor, referred to the content of the motor, the same below) requirements, inspection rules.
Use temperature, viscosity, cleanliness and other parameters meet the specified operating medium by the pump motor rated speed and nominal co-determination Pump motor conditions.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 13853
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 13853-2009 | General specification for hydraulic pumps and motors of ship | current edition | Current |
| GB/T 13853-1992 | General specification of hydraulic pumps and motors for ship | previous edition | Superseded |
This page sells the current edition, GB/T 13853-2009. Earlier editions are listed for reference only.
How to Download GB/T 13853-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 13853-2009
$255.00