GB/T 13747.1-2017Methods for chemical analysis of zirconium and zirconium alloys - Part 1: Determination of tin content - Potassium iodate titration and phenylfluorone-polyethylene glycoloctyl phenyl ether spectrophotometry (English PDF)

Foreword

GB/T 13747 "zirconium and zirconium alloy chemical analysis method" is divided into 27 parts.

--- Part 1. Determination of tin content potassium iodate titration and phenylfluorone - polyethylene glycol octyl phenyl ether spectrophotometry;

--- Part 2. Determination of iron content 1,10-phenanthroline spectrophotometry and inductively coupled plasma atomic emission spectrometry;

--- Part 3. Determination of nickel content dimethylglyoxime spectrophotometry and inductively coupled plasma atomic emission spectrometry;

--- Part 4. Determination of chromium content Diphenylcarbazide spectrophotometry and inductively coupled plasma atomic emission spectrometry;

--- Part 5. Determination of aluminum content chrome azure S-tetradecyl pyridine chloride spectrophotometry;

--- Part 6. Determination of copper content 2,9-dimethyl-1,10-phenanthroline spectrophotometry;

--- Part 7. Determination of manganese content potassium periodate spectrophotometry and inductively coupled plasma atomic emission spectrometry;

--- Part 8. Determination of cobalt content Nitroso R salt spectrophotometry;

--- Part 9. Determination of magnesium content by flame atomic absorption spectrometry;

--- Part 10. Determination of tungsten content thiocyanate spectrophotometry;

--- Part 11. Determination of molybdenum content thiocyanate spectrophotometry;

--- Part 12. Determination of silicon content Molybdenum blue spectrophotometry;

--- Part 13. Determination of lead content polarographic method;

1 Scope

GB/T 13747.1-2017 is the Chinese national standard on methods for chemical analysis of zirconium and zirconium alloys - part 1: determination of tin content - potassium iodate titration and phenylfluorone-polyethylene glycoloctyl phenyl ether spectrophotometry, in the field of metallurgy. The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up - which in practice is how most foreign buyers meet it. It was issued on 29 September 2017 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 April 2018. Classification: ICS 77.120.99, CCS H63. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there. The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.

GB/T 13747 provisions of this part of zirconium and zirconium alloys Determination of tin content. This section applies to sponge zirconium, zirconium and zirconium alloy determination of tin content. Potassium iodate titration range 0.50% ~ 4.00%; phenyl Fluorone - polyethylene glycol octyl phenyl ether spectrophotometric determination of the range of 0.0010% to 0.045%.

2 Methods Potassium iodate titration

2.1 Method summary The sample is decomposed with ammonium sulfate-ammonium sulfate, and the impurity elements are masked with fluoride ions in a hydrochloric acid medium. Tin (IV) is reduced to tin (II) using aluminum flakes, To starch solution as an indicator, titration with potassium iodate standard titration solution until the solution showed a blue end.

2.2 Reagents Unless otherwise specified, only reagents that are identified as analytically pure and laboratory-grade water are used in the analysis.

2.2.1 Ammonium sulfate.

2.2.2 Ammonium fluoride.

2.2.3 aluminum (wAl >= 99.5%).