GB/T 13025.12-2012General test method in salt industry - Determination of barium (English PDF)

Foreword

This Standard belongs to a complete group of general test method standards in salt industry; the complete group comprises the following 13 parts at present; and other test method standards will be developed in the future, if necessary.

-- GB/T 13025.1 General Test Method in Salt Industry - Determination of Grain Size -- GB/T 13025.2 General Test Method in Salt Industry - Determination of Whiteness -- GB/T 13025.3 General Test Method in Salt Industry - Determination of Moisture -- GB/T 13025.4 General Test Method in Salt Industry - Determination of Insoluble Matter -- GB/T 13025.5 General Test Method in Salt Industry - Determination of Chloride -- GB/T 13025.6 General Test Method in Salt Industry - Determination of Calcium And Magnesium -- GB/T 13025.7 General Test Method in Salt Industry - Determination of Iodine -- GB/T 13025.8 General Test Method in Salt Industry - Determination of Sulfate -- GB/T 13025.9 General Test Method in Salt Industry - Determination of Lead -- GB/T 13025.10 General Test Method in Salt Industry - Determination of Ferrocyanide -- GB/T 13025.11 General Test Method in Salt Industry - Determination of Fluoride -- GB/T 13025.12 General Test Method in Salt Industry - Determination of Barium -- GB/T 13025.13 General Test Method in Salt Industry - Determination of Arsenic This Standard is the part 12 of GB/T 13025.

This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This Standard replaces GB/T 13025.12-1994, General Test Method in Salt Industry - Determination of Barium Ion. Compared with GB/T 13025.12-1994, the main technical differences of this Standard, except editorial modifications, are as follows.

-- it optimizes the conditions and parameters of graphite furnace;

1 Scope

This Part of GB/T 13025 specifies the method for determination of barium in salt products.

This Standard applies to the determination of barium in salt products.

2 Normative References

The following referenced documents are indispensable for the application of this document. For dated references, only the edition dated applies to this document. For undated references, the latest edition of the referenced document (including any amendments) applies to this Standard.

GB/T 6682-2008 Water for Analytical Laboratory Use - Specification and Test Methods

3 Principle

Sample is injected into a graphite furnace atomizer after it is processed properly; the barium contained dissociated into an atomic vapour in the graphite pipe through high temperature evaporation; the ground state atoms absorbs the resonance line emitted from barium hollow cathode lamp, and its absorption intensity is proportional to the concentration of barium within a certain range.

4 Reagents