GB/T 12366-2009Guideline for the work of complex standardization (English PDF)

Foreword

This standard replaces GB/T 12366.1-1990 "comprehensive work of standardization principles and methods", GB/T 12366.2-1990 "Comprehensive The work of standardization - General requirements of complex standardization of industrial products ", GB/T 12366.3-1990" comprehensive work of standardization of agricultural production Products are generally complex standardization requirements "and GB/T 12366.4-1991" comprehensive work of standardization is the standard complex planning methods. " Compared with this standard instead of the standard four main changes are as follows:

--- The public, reasonable, in line with the current requirements of section 4 of the original standard, a comprehensive refining;

--- Excluding the GB/T 12366.2-1990 Industrial products in this specific range limits, to retain general requirements;

--- Remove GB/T 12366.2-1990 in A "fan normalized correlation comprehensive schematic elements" Appendix;

--- Excluding the GB/T 12366.3-1990 agricultural products this particular range limits, to retain general requirements;

--- Remove GB/T 12366.3-1990 Appendix A "relevant elements of Xinjiang cotton map";

--- The GB/T 12366.4-1991 The contents incorporated into this standard in the past, as part of the overall plan. This standard is proposed and managed by China National Institute of Standardization. This standard drafting units. China National Institute of Standardization, China Electronics Standardization Institute, Tsinghua University. The main drafters of this standard. Dong Xiaoyuan, Zhaochao Yi, Pang Zheng Hu, Wang Jinyu, Wang Yi Yi, Yang Rui, Lu Xilin. This standard replaces the standards previously issued as follows:

--- GB/T 12366.1-1990;

--- GB/T 12366.2-1990;

--- GB/T 12366.3-1990;

--- GB/T 12366.4-1991. Comprehensive Guide for standardization

1 Scope

GB/T 12366-2009 is the Chinese national standard on guideline for the work of complex standardization, in the field of generalities, terminology and documentation. The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up - which in practice is how most foreign buyers meet it. It was issued on 6 May 2009 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 November 2009. Classification: ICS 01.120, CCS A00. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there. The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.

The standard provides a comprehensive standardized terminology, basic principles, procedures and methods. This standard applies to all kinds of complex standardization activities standardized objects.

2 Terms and definitions

The following terms and definitions apply to this standard.

2.1 Factors influencing the functional requirements of complex standardization objects or specific targets. NOTE. When you carry out a comprehensive standardization activities selected final products relating to the object.

2.2 Comprehensive standardization object and its associated elements of its internal relations or functional requirements with the best overall efficiency target related indicators Association formed Tune optimization, sets standards complement each other.

2.3 In order to achieve the objectives, the use of systems analysis, complex to establish standards and implement standardization activities implementation.

3 Basic Principles

The comprehensive standardized object and its associated elements as a system to carry out standardization work, and the scope should be clear and relatively complete. Comprehensive standardization of the whole process should be planned and organized manner, the overall efficiency of the system (including technical, economic and social aspects of Comprehensive Benefit) best as the goal, to ensure the overall coherence and best, local benefit to overall efficiency. Develop and implement a comprehensive body of standards standards should cooperate with each other, may be included in the standard at different levels, but the number of standard It should be moderate and should implement the standard among high-level low-level compliance requirements. Should take full selection of existing standards, amendments to existing standards or additional requirements, if necessary. Actively adopt international standards and advanced foreign standard. Standard complex should be revised in light of the product life cycle.

4 Procedures

Comprehensive standardization of procedures in Table 1. Table 1 work of complex standardization program Phase-step process Preparation Phase OK Object Survey Feasibility Analysis See