GB/T 10801.1-2025Moulded polystyrene foam (EPS) for thermal insulation (English PDF)
绝热用模塑聚苯乙烯泡沫塑料(EPS)
This is a limited preview
Buy now to download the full PDF (12 pages)
Need quotation for your management?
Get a formal quotation for GB/T 10801.1-2025 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
December 31, 2025
Implementation date
July 1, 2026
Scope
GB/T 10801.1-2025 is the English-translated version of 绝热用模塑聚苯乙烯泡沫塑料(EPS).
GB/T 10801.1-2025 is the Chinese national standard on moulded polystyrene foam (eps) for thermal insulation, in the field of rubber and plastic industries.
The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up — which in practice is how most foreign buyers meet it.
It was issued on 31 December 2025 by the State Administration for Market Regulation; Standardization Administration of China, and has been in force since 1 July 2026.
Classification: ICS 83.100, CCS G32. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there.
The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.
Found what you need?
Document preview — GB/T 10801.1-2025
National Standard of the People's Republic of China
- ICS
- 83.100
- Classification
- G32
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification
- 5 Requirements
- 6 Test methods
- 7 Inspection rules
- 8 Marking, labelling and instructions for use
- 9 Packaging, transport and storage
3 Terms and definitions
4 Classification
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, labelling and instructions for use
9 Packaging, transport and storage
Foreword
This document was issued on 31 December 2025 by the State Administration for Market Regulation and the Standardization Administration of the People's Republic of China, and has been in force since 1 July 2026.
It replaces GB/T 10801.1-2021.
Classification: ICS 83.100, CCS G32.
About this edition
GB/T 10801.1-2025 is the current edition. It was issued on 31 December 2025 and has been in force since 1 July 2026, replacing GB/T 10801.1-2021.
GB/T 10801.1-2021 has been superseded: a specification that still cites it is citing a withdrawn edition.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.
Classification and status
GB/T 10801.1-2025 is classified under ICS 83.100, in the field of rubber and plastics industries. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.
Its Chinese Standard Classification code is CCS G32. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.
The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 12 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 29045-2025Prefabricated thin hot water radiant heating board
- GA 2177-2024Winter helmet for immigration police on duty
- GB/T 23450-2024Heat preservation panels for partition wall used in buildings
- GB/T 35608-2024Green product assessment - Thermal insulation materials
- GB/T 26540-2022Metal network composite insulation board for wall insulation and finish systems
- LY/T 3217-2020Wood based structural insulated panels for buildings
Similar standards
Editions of GB/T 10801.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 10801.1-2025 | Moulded polystyrene foam (EPS) for thermal insulation | current edition | Current |
| GB/T 10801.1-2021 | Moulded polystyrene foam for thermal insulation (EPS) | previous edition | Superseded |
This page sells the current edition, GB/T 10801.1-2025. Earlier editions are listed for reference only.
How to Download GB/T 10801.1-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10801.1-2021 — Moulded polystyrene foam for thermal insulation(EPS)
GB/T 10801.2-2025 — Rigid extruded polystyrene foam (XPS) board for thermal insulation
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 10801.1-2025
$210.00