GB 50213-2010Code of acceptance of shaft sinking and drifting of coal mine (English PDF)
煤炭井巷工程质量验收规范
This is a limited preview
Buy now to download the full PDF (98 pages)
Need quotation for your management?
Get a formal quotation for GB 50213-2010 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China; General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Level / Type
National · Mandatory
Issue date
May 31, 2010
Implementation date
December 1, 2010
Scope
GB 50213-2010 is the English-translated version of 煤炭井巷工程质量验收规范.
GB 50213-2010 — 1.0.1 In order to strengthen the quality management of coal mine shaft engineering, unify the quality acceptance regulations of coal mine shaft engineering, and ensure the quality of the project, this specification is formulated.
1.0.2 This code is applicable to the acceptance of coal mine shaft engineering quality. 1.0.3 The construction quality requirements of the coal mine shaft engineering contract and engineering technical documents shall not be lower than those specified in this specification.
1.0.4 In addition to conforming to this specification, the quality acceptance of coal mine shaft and roadway engineering should also conform to the provisions of the current relevant national standards.
Found what you need?
Document preview — GB 50213-2010
National Standard of the People's Republic of China
- Classification
- P 70
- Replacing
- GBJ 213-1990
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China; General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Contents
- What this standard covers1
- Document data2
- Standards quoted by this document3
What this standard covers
This Chinese standard applies to the quality of coal mine project acceptance.
Document data
Chinese classification (CCS): P70.
Estimated length of the Chinese original: 149,191 words.
Supersedes the earlier edition GBJ 213-1990.
Standards quoted by this document
GB 50003; GB 50086; GB 50108; GB 50119; GB 50203; GB 50204; GB 50208; GB 50300; GBJ 107; GB 175; GB 1499.1; GB 1499.2; GB 8076; GB 13014; GB/T 18736; JGJ 18; JGJ 52; JGJ 55; JGJ 63; MT 195; MT/T 5015
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 98 pages — is available in the English PDF.
Referenced standards
Cited by
- NB/T 11548-2024Technical specification for simultaneous operation of drilling and grouting in vertical shaft
- NB/T 11454-2023Specification for risk management of freezing sinking method
- GB/T 39963-2021Technical specification on C80~C100 concrete shaft lining applied in vertical freezing shaft
- NB/T 10527-2021Code for construction of shaft grouting in coal mine
- NB/T 10731-2021Specification for design, construction and acceptance of waterproof dams in underground coal mine
- NB/T 10743-2021Acceptance specification for intelligent fully mechanized mining face
How to Download GB 50213-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11118-2026 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB 11557-2026 — Provisions for protecting drivers from injury by the steering mechanism of motor vehicles
GB 12021.4-2026 — Maximum allowable values of the energy consumption, water consumption and grades for electric washing machines and washer-dryers
Secure payment via Stripe
Payments accepted
GB 50213-2010
$3,015.00