GB 22603-2008Tebuconazole wettable powders (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents".

Drafting.

This document replaces GB/T 22603-2008 "Tebuconazole Wettable Powder". Compared with GB/T 22603-2008, the main differences are structural adjustments and...

Aside from editorial changes, the main technical changes are as follows.

---Added 40% and 45% specifications to the technical specifications (see 4.2);

---The technical specification for sustained foaming performance has been added (see 4.2);

---The technical specifications for suspension rate have been changed (see 4.2, 3.2 in the 2008 version);

---The technical specifications for thermal storage stability have been revised (see 4.2, 4.9 in the 2008 edition);

---The gas chromatography method for the determination of tebuconazole mass fraction has been modified, and gas chromatography is now the arbitration method (see 5.5.1, 2008 edition).

(4.3.2)

---Product inspection and acceptance have been removed (see 4.10 in the 2008 edition);

---Added inspection rules (see Chapter 6);

---An acceptance and quality guarantee period has been added (see Chapter 7);

---Safety and warranty periods have been removed (see 5.5 and 5.6 of the 2008 edition).

Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.

This document was proposed by the Ministry of Agriculture and Rural Affairs of the People's Republic of China.

This document is under the jurisdiction of the National Technical Committee on Pesticide Standardization (SAC/TC133).

1 Scope

This document specifies the technical requirements, inspection rules, acceptance procedures, and quality guarantee period for tebuconazole wettable powder, as well as its marking, labeling, and packaging.

The test methods for tebuconazole wettable powder are described, including storage and transportation.

This document applies to the quality control of tebuconazole wettable powder products.

Note. Other names, structural formulas and basic physicochemical parameters of tebuconazole are given in Appendix A.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.

For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.

This document.

GB/T 1600-2021 Method for Determination of Moisture Content in Pesticides GB/T 1601 Method for Determination of pH Value of Pesticides GB/T 1604 Rules for Acceptance of Commercial Pesticides GB/T 1605-2001 Sampling Methods for Commercial Pesticides GB 3796 General Rules for Pesticide Packaging GB/T 5451 Determination of wettability of pesticide wettable powders GB/T 8170-2008 Rules for rounding off numerical values and the representation and determination of limiting values GB/T 14825-2023 Method for Determination of Pesticide Suspension Rate GB/T 16150-1995 Method for Determination of Fineness of Pesticide Powders and Wettable Powders GB/T 19136-2021 Determination of thermal storage stability of pesticides GB/T 28137 Determination of persistent foaming properties of pesticides

3 Terms and Definitions

This document does not contain any terms or definitions that need to be defined.

4 Technical Requirements