GB 17733-2008Geographical names - Signs (English PDF)

4.2 Places entity signposts

4.2.1 residential place name signs, including street, alley, area sheet, district, door, floor, floor unit, floor and village names and other signs.

4.2.2 Administrative region signposts, including the provincial level (provinces, autonomous regions, municipalities and special administrative regions) signposts, ground level (prefecture-level cities, autonomous State, prefecture and the AU, etc.) signposts, county (counties, cities, municipal districts, autonomous and flag, etc.) signposts, township (township, China Family and hematoxylin township, etc.) signposts.

4.2.3 Professional area signposts, including mining, agricultural areas, forests, pasturelands, industrial areas, border areas, development zones, nature reserves, etc. Signposts.

4.2.4 signposts facilities, including the railway station, bus station, ground (Town) Rail stations, seaports, river ports, ferries, airports, bridges (such as road bridge Beams, railway bridges, flyovers and overpasses in the town, etc.), tunnels (such as road tunnels, railway tunnels, underground passages within the town, etc.), ring Signposts Island has a place name meaning transport facilities, ponds, seawall, reservoirs, flood storage areas, irrigation canals, dams, canals and other place names have meaning Signposts meaning of water conservancy facilities, power plants, power transmission stations and other signposts Names have significant power facilities.

4.2.5 memorial and tourist signposts, including scenic areas, parks, people memorial (for example cemetery, people memorial, Memorial, etc.), Memorial events (such as the ancient battlefield, etc.), religious memorial (such as temple, temple, church, etc.) and the like signposts.

5.1 Settings

5.1.1 Safety Requirements Signposts set should not exist.

a) cause any harm to the potential danger to persons;

b) any potential risk to the environment caused by pollution.

5.1.2 setting mode Signposts generally used. Column (mounted on one or more than one column), cantilevered, attachment type (such as hang nails, paste, insert Inlay, etc.), stele style, as well as other manner.

5.1.3 Set height In general, the lower edge of Column height from the ground, and attached to the cantilever type signposts of not less than 2m. Less than 2m When the signposts corners shall be arc.

5.1.4 Setting Density

5.1.4.1 should be adapted to local conditions to determine the density of the signposts set up to ensure its full pointing guiding function.

5.1.4.2 Under normal circumstances, street, alley intersection shall be provided street, alley signposts. When the two intersection interval is greater than 300m, adaptive When increasing the number of street, alley of signposts.

5.2 Content layout

5.2.1 Text Chinese characters should use standard Chinese characters written on signposts 5.2.1.1.

5.2.1.2 signposts minority autonomous areas shall be marked in a minority character of local government regulations, the font used in accordance with its The relevant provisions of the state.

5.2.1.3 Methods Phonetic Spelling accordance with the provisions of "Chinese place names Pinyin spelling rules (Chinese Names section)," the.

5.2.1.4 Minority Language Names Phonetic Spelling according to "minority language place names written phonetic alphabet transliteration" spelling.

5.2.1.5 signposts should use bold text. Word word phonetic alphabet and Arabic numerals in Appendix A.

5.2.1.6 signposts correct text, strokes clear, neat, evenly spaced, moderate overall position.

5.2.2 graphical symbols

5.2.2.1 increase following the signposts graphic symbols.

a) a specialized area signposts;

b) facilities signposts;

c) memorial and tourist signposts.

5.2.2.2 drawing and graphic symbols shall comply with the relevant provisions of GB/T 10001 in.

5.2.3 indicate the direction of information Street, Street Lane signposts marked increase, indicating the lane towards the direction information.

5.2.4 zip code ZIP code area where the door signposts increase.

5.3.1 Text

5.3.1.1 sea, water, topography, administrative area, professional areas, facilities, memorial and tourist signposts and street, alley, area sheet, cell, Village residents signposts, the upper three-fifths of the area marked characters names of geographical entities, two fifths of the lower part of the area marked geographical entity Pinyin name. Layout examples are shown in Figure B. 1 to B. 15.

5.3.1.2 Building signposts left three-fifths of the area marked where blocks of Chinese characters and pinyin name of the village, where the characters name is marked Shown in the upper three-fifths of the region, in a region marked Pinyin two fifths of the lower portion. Area to the right of two fifths of the number of buildings marked, Number with Arabic numerals, a height of not less than 350mm. Layout example shown in Figure B. 16.

5.3.1.3 Door signposts region marked an upper two fifths courtyard, independent portal where the characters name neighborhoods and villages, the lower three-fifths Regional Flag of the door numbered in Arabic numerals written. Layout example shown in Figure B. 17. Three-fifths of the central unit floor area

5.3.1.4 signposts indicate the width of floor unit name. The first unit with "a unit" means, in turn analogy. Layout example shown in Figure B. 18.

5.3.1.5 Floor area middle three-fifths of the diameter of the signposts marked floor number. On the ground floor with the first "1", and so on; to Dir layer with "B1" represents, and so on. Layout example shown in Figure B. 19.

5.3.1.6 When stele formula signposts vertical position, the upper four-fifths of the area marked characters of the name of a geographical entity, one fifth of the area of the lower portion Domain names Pinyin marked geographic entity, the name of vertical writing characters, Pinyin horizontal writing. Layout example shown in Figure B. 20. Flag minority When the text marked in minority languages under the name of Chinese characters, wherein the upper three-fifths of the area marked characters geographic entity name, middle Fifth area markers minority languages, the lower fifth of the area marked Pinyin, minority languages horizontal writing. When stele style signposts tap the upper three-fifths of the area marked characters names of geographical entities, two fifths of the lower part of the area marked Pinyin geographical entity name, Chinese name and Pinyin horizontal writing. Layout example shown in Figure B. 21.

5.3.1.7 In addition to the formula stele erected signposts set outside, under normal circumstances, marked minority languages, minority languages were marked in Chinese characters Above said, one third of the area of the upper portion of the original Chinese characters written in the name of the region marked minority languages, the lower two-thirds of the area marked Kanji name He said other parts of the same proportion.

5.3.2 graphical symbols When setting graphic symbols, regional signposts left two fifths marked graphic symbol, three-fifths of the right side of the area marked geographical entity Chinese characters and Pinyin names, including Chinese characters name plate in the upper three-fifths of the region, Pinyin marked in the lower region of two fifths area. Layout example shown in Figure B. 22.

5.3.3 indicate the direction of information Information indicating the direction marked on both sides of Pinyin, and maintain a certain distance and Pinyin. Information indicating the direction of the height of Chinese characters Same height phonetic language. Layout example shown in Figure B. 23.

5.3.4 zip code When the door to the signposts marked ZIP, the fifth region marked an upper courtyard, independent portal where the characters name neighborhoods and villages. Three-fifths of the central region of the door marked numbered in Arabic numerals written. Fifth regional area where the lower part of the door marked Domain zip code in the "zip code" words marked by a space, encoding with Arabic numerals. Layout example shown in Figure B. 24. Color

5.4 Color signposts requirements in Table 1. Table, white, yellow-green or blue may be green when using long afterglow materials. Divided by the substrate and brown color as the background color, the place name signs should be used GB 2893 required safety color. Background color stele style signposts of the substrate can be color, text color should be black or red. Color on the signposts graphic symbol shall comply with the relevant provisions of GB/T 10001 in, and with the flag material, background color and logo The color of the text on maintaining coordination. Table 1 color requirements Type Background Color text color Residential Signposts Street, Lane signposts Blue (east-west, including the east-west Byway), Green (north to south, including the north-south Byway) white Sheet area, district, door, floor unit, Floor, village signposts blue White Substrate color (metal corrosion signposts) black or red House signposts Write the name of the left blue area, the right to write Floor area is white Left written text is white on the right writing F red Substrate color (metal corrosion signposts) black or red Administrative areas, facilities signposts blue Professional areas, sea, water, terrain signposts green Memorial and tourist signposts brown white

5.5 Dimensions

5.5.1 signposts graphic writing surface the size specifications in Table 2. Table

1 Size specifications in millimeters Types of Writing plane size graphic Length and width The width of the outer edge Residential Signposts Street name signs 1200 ~ 1700 300 ~ 700 <=

25 Lane signposts 460 160 <=

5.7.1 Board

5.7.1.1 substrate can be used the following materials.

a) a metal material;

b) an inorganic non-metallic materials;

c) polymer materials.

5.7.1.2 substrate should have a certain hardness, impact resistance, bending resistance and tensile properties.

5.7.1.3 substrate surface should be smooth, flat, no scratches, cracks, dirt.

5.7.1.4 When necessary, the metal material surface rust should be prepared to deal with.

5.7.2 spray corrosion resistance After the test method in accordance with the provisions of 120h 6.3, the surface of the specimen shall discoloration, blistering and erosion phenomena.

5.7.3 heat-resistant properties After following the test method specified in 6.4 48h, the surface of the specimen shall blistering, rust and fall off and so on.

5.7.4 high temperature performance After following the test method specified in

6.5 of 24h, the surface of the specimen shall cracks, softening, peeling, wrinkles, blistering, no warping and appearance Uniform and so on.

5.7.5 low temperature performance The method according to the provisions of

6.6 after test 72h, the surface of the specimen shall cracks, softening, peeling, wrinkles, blistering, no warping and appearance Uniform and so on.

5.7.6 weathering performance After the test method in accordance with the provisions of 1200h 6.7, the surface of the specimen shall discoloration, cracks, mildew, rust, dents, blistering, erosion, Peeling, chalking, deformation and shedding phenomenon.

5.8.1 Reflective signposts

5.8.1.1 performance chroma chromaticity coordinates for each color in the test method, the sample surface GB/T 18833-2002

7.3 prescribed And luminance factor should be GB/T 18833-2002 in the range of Table 1, all kinds of color chromaticity diagram, see GB/T 18833-2002 in Figure 3.

5.8.1.2 retroreflective performance of retroreflective system according to GB/T 18833-2002 test method specified in 7.4, the sample surface are not to Four reflective film is less than GB/T 18833-2002 specified requirements.

5.8.2 Long afterglow signposts

5.8.2.1 Test method in accordance with the provisions of 6.10, the sample should be higher than the initial brightness 10000mcd/m2, brightness should stimulate end 10h Less than 3mcd/m2. Performance long afterglow powder used

5.8.2.2 requirements should be consistent with the corresponding provisions of Appendix C.

5.8.2.3 When using the film as a bottom surface, the film's performance should be consistent.

a) Water resistance. In addition to the sample in accordance with external

6.1 prepared in accordance with the test method after 5min GB/T 1733 regulations, should not be lost Light, discoloration, blistering, wrinkling, loss, rust and other phenomena;

b) impact resistance. In addition to the sample in accordance with external

6.1 prepared according to the method after the test GB/T 1732 regulations, not crack, Wrinkles and peeling and so on;

c) resistance to bending performance. In addition to the sample in accordance with external

6.1 prepared according to the method after the test GB/T 11185 regulations s...

5.8.2.3

b) require the column item; other signposts in accordance with After the test method specified in 6.9, the sample should not be damaged.