GB 15082-2026Speedometer for motor vehicle and motorcycle (English PDF)
汽车、摩托车用车速表
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB 15082-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Mandatory
Issue date
April 30, 2026
Implementation date
July 1, 2027
Scope
GB 15082-2026 is the English-translated version of 汽车、摩托车用车速表.
GB 15082-2026 rewrites the speedometer standard and widens it: where the 2008 text covered cars only, this one covers motorcycles as well, and it grows from one thousand words to four and a half thousand with terms and definitions, full test methods and the rules for judging whether a variant counts as the same type.
The core provision is unchanged — the indicated speed must never read below the true speed — but the requirements now address digital displays and electronic drive as well as the mechanical instruments the old text assumed.
Issued on 30 April 2026, it takes effect on 1 July 2027, replacing GB 15082-2008. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the edition it replaces are taken from there.
The clause text, the tables and the numeric limits are not reproduced on this page — they are in the document itself, which is delivered in full in English translation.
Found what you need?
Document preview — GB 15082-2026
National Standard of the People's Republic of China
- ICS
- 43.040.10
- Classification
- T 35
- Replacing
- GB 15082-2008
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Requirements
- 5 Test methods
- 6 Determination of the same type
- 7 Implementation of the standard
Foreword
This document was issued on 30 April 2026 by the State Administration for Market Regulation and the Standardization Administration of the PRC, and takes effect on 1 July 2027.
It replaces GB 15082-2008, which is superseded.
Classification: ICS 43.040.10, CCS T 35.
It is a GB standard without the /T suffix: compliance is mandatory in China.
1 Scope
GB 15082-2026 rewrites the speedometer standard and widens it: where the 2008 text covered cars only, this one covers motorcycles as well, and it grows from one thousand words to four and a half thousand with terms and definitions, full test methods and the rules for judging whether a variant counts as the same type. The core provision is unchanged — the indicated speed must never read below the true speed — but the requirements now address digital displays and electronic drive as well as the mechanical instruments the old text assumed. Issued on 30 April 2026, it takes effect on 1 July 2027, replacing GB 15082-2008. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the edition it replaces are taken from there. The clause text, the tables and the numeric limits are not reproduced on this page — they are in the document itself, which is delivered in full in English translation.
Remaining clauses in the full document
- 2 Normative references
- 3 Terms and definitions
- 4 Requirements
- 5 Test methods
- 6 Determination of the same type
- 7 Implementation of the standard
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Editions of GB 15082
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB 15082-2026 | Speedometer for motor vehicle and motorcycle | current edition | Current |
| GB 15082-2008 | Speedometer for motor vehicle and motorcycle | previous edition | Superseded |
This page sells the current edition, GB 15082-2026. Earlier editions are listed for reference only.
How to Download GB 15082-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11118-2026 — Hydraulic fluids (L-HL, L-HM, L-HV, L-HS and L-HG type)
GB 11557-2026 — Provisions for protecting drivers from injury by the steering mechanism of motor vehicles
GB 12021.4-2026 — Maximum allowable values of the energy consumption, water consumption and grades for electric washing machines and washer-dryers
Secure payment via Stripe
Payments accepted
GB 15082-2026
$120.00